Pegasus

So I just finished installing my new HR-03 on my 2900 pro and I turned on the computer and everything was fine, but then when I get to the windows loading screen the screen goes black and the red light on my 2900 pro goes and stays on... what does that mean?

+rep for help

thx

__________________

Dragoon

Try reseating the heatsink. And check if you have enough TIM, or if you have too much. And check if the card is properly fit in the slot, the weight from the heatsink might nudged it out.

__________________
Photo Equip:
Body: Canon EOS XS/1000D | Bag: LowePro Fastpack 250
Canon lenses: EF-S 18-55mm ƒ/3.5-5.6 IS | EF-S 60mm ƒ/2.8 Marco USM | EF 70-200mm ƒ/4L IS USM
Sigma lenses: 30mm ƒ/1.4 EX DC HSM [0/360€] | 10-20mm ƒ/3.5 EX DC HSM [0€/525€]

Project ИιהєBязλκεя Updated May,31 2009

My Flickr

sLowEnd

You used AS5 right?

Did you make sure to not get any AS5 on the wrong places? You should only have AS5 on the die

Also make sure your cooler isn't shorting anything
Check the mounting brackets and the heatsink itself

__________________