|
![]() |
Overclock.net - Overclocking.net > Graphics Cards > ATI > ATI Cooling | |
HIS 4830 Runs Really Hot.
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | |||||||||||||
|
PC Gamer
|
I have a HIS 4830 Fan edition and when I play CoD 4 with my phenom 9500 overclocked to 2.6GHz my card gets up to 87C. Since I can't change the speed because there's only 2 wires going to the fan instead of 3 how can I get it to run cooler?
__________________
Signature your on it put, backwards this read to enough dumb were you if 95.567% of people make up the stats in their sig. If you are part of the 4.433% who uses real stats, put this in your sig. I am 54% addicted to Counterstrike. What about you?
|
|||||||||||||
|
|
|
|
|
#2 (permalink) | ||||||||||||
|
Extreme Cooler
![]()
Join Date: Jun 2008
Location: Dominican Republic./33126
Posts: 2,349
Rep: 116
![]() ![]() Unique Rep: 97
Trader Rating: 4
|
buying a new gpu cooler.
__________________
|
||||||||||||
|
|
|
|
|
#3 (permalink) | |||||||||||||
|
PC Gamer
|
__________________
Signature your on it put, backwards this read to enough dumb were you if 95.567% of people make up the stats in their sig. If you are part of the 4.433% who uses real stats, put this in your sig. I am 54% addicted to Counterstrike. What about you?
|
|||||||||||||
|
|
|
|
|
#4 (permalink) | |||||||||||||
|
4.0ghz
![]() |
After looking up your case, my bet would be high temps are probably caused by bad case airflow. i could be wrong but that thing looks like an oven. A simple way to find out would be stressing the card with the side panel off, if temps are much better then the case is to blame.
__________________
|
|||||||||||||
|
|
|
|
#5 (permalink) | |||||||||||||
|
PC Gamer
|
Ya it sorta is...My wires are everywhere and I know that contributes to the heat.
__________________
Signature your on it put, backwards this read to enough dumb were you if 95.567% of people make up the stats in their sig. If you are part of the 4.433% who uses real stats, put this in your sig. I am 54% addicted to Counterstrike. What about you?
|
|||||||||||||
|
|
|
|
|
#6 (permalink) | ||||||||||||||
|
PC Gamer
![]() |
take some time to do some wire management, and small mods like hole for behind the mobo tray, and for the ATX power lines
__________________
95.567% of people make up the stats in their sig. If you are part of the 4.433% who uses real stats, put this in your sig. Quote:
|
||||||||||||||
|
|
|
|
|
#7 (permalink) | |||||||||||||
|
PC Gamer
|
M'kay I was thinking of get some split looms and hiding my wires but haven't gotten that far. But is that a good temp I'm a little paranoid when it comes to temps?
__________________
Signature your on it put, backwards this read to enough dumb were you if 95.567% of people make up the stats in their sig. If you are part of the 4.433% who uses real stats, put this in your sig. I am 54% addicted to Counterstrike. What about you?
|
|||||||||||||
|
|
|
|
|
#8 (permalink) | ||||||||||||||
|
ATI Enthusiast
Join Date: Jan 2009
Location: Thunder Bay, Ontario
Posts: 872
Rep: 23
![]() Unique Rep: 23
Trader Rating: 0
|
Quote:
__________________
It is a dark year for forums. Trolling, fan-boyism, speculation news, boycotts, petitions, rioting and just pure idiocy.
|
||||||||||||||
|
|
|
|
|
#9 (permalink) | ||||||||||||
|
New to Overclock.net
![]() |
I expect that either the reported temps are wrong or there's something up with the case airflow. My 4830 barely gets warm (50-53c when the room is warm and I leave if folding for extended periods with the fan set at 25%). With mine, I can manually set the fan, or let the card control the fan. I usually do the latter and it seems to keep the fan dialed really low untill the card gets over 50c, then it will spin it up to 20-30%. Mine is currently clocked at 700 core and 910 mem.
__________________
Laptop: Lenovo X61S
|
||||||||||||
|
|
|
|
|
#10 (permalink) | |||||||||||||
|
*cough* Stock *cough*
![]() |
Cable management is a good idea. Run the machine with the side panel removed to see if anything changes.
__________________
3DmarkVantage.v1.01=P15,434::17022:12059(stock, no PhysX) 3DmarkVantage.v1.01=P24,155::20817:46545(690|1466| 1073MHz,PhysX on) 3DMark06v1.1.0.Pro(PhysX=disabled)=22,564::8526.11 642.5660@1280x1024
|
|||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|