|
![]() |
Overclock.net - Overclocking.net > Graphics Cards > ATI > ATI Cooling | |
Best of the best air cooler for 4800 series
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#21 (permalink) | ||||||||||||||
|
Canadian Overclocker
![]()
Join Date: Mar 2007
Location: Manitoba, Canada
Posts: 2,919
Rep: 330
![]() ![]() ![]() ![]() Unique Rep: 246
Trader Rating: 1
|
Idles at 40c, loads at 52c with ATI Tool and 63c with OCCT (equal Furmark load). This is overclocked to 775/1000.
__________________
Quote:
|
||||||||||||||
|
|
|
|
#22 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
what are your vrms? someone told me you cannot use the stock plate with the t-rad2
__________________
|
|||||||||||||
|
|
|
|
|
#23 (permalink) | ||||||||||||||
|
Canadian Overclocker
![]()
Join Date: Mar 2007
Location: Manitoba, Canada
Posts: 2,919
Rep: 330
![]() ![]() ![]() ![]() Unique Rep: 246
Trader Rating: 1
|
Don't know the VRMs, no program gives me a reading. The stock VRM heatsink works fine with the T-RAD2, the heatsink does feel slightly cooler though.
__________________
Quote:
|
||||||||||||||
|
|
|
|
#24 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
Someone lied to me then..this was a PM i received..
Don't really care though because I full load at 47c with my musashi
__________________
|
|||||||||||||
|
|
|
|
|
#25 (permalink) | ||||||||||||||
|
Canadian Overclocker
![]()
Join Date: Mar 2007
Location: Manitoba, Canada
Posts: 2,919
Rep: 330
![]() ![]() ![]() ![]() Unique Rep: 246
Trader Rating: 1
|
Depends on the vendor his card, which is probably not Sapphire as mine is.
__________________
Quote:
|
||||||||||||||
|
|
|
|
#26 (permalink) | ||||||||||||
|
Intel Overclocker
![]() |
had anyone tried T-rad2 with no fan at all?
just for the test to see idle, or load (if possible) temps?
|
||||||||||||
|
|
|
|
|
#27 (permalink) | ||||||||||||
|
Intel Overclocker
![]() |
double post...SRY...but found it with 9600GT:
http://en.expreview.com/2008/08/16/s...-review.html/7 idle: 52C Load: 102C
|
||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|