laurie

I have found that in 3d mark 06 the card does not run at 3d clocks. It does in games but only if they are full screen.

To the OP.
Start GPUz and then a game. When the game is in full screen alt tab out to GPUz and see if your clocks are changing.
Now I just need to work out how to force 3d clocks in 06?

__________________
Do not shop at overclockersuk
Do shop at watercoolinguk

Will your CPU be a bottleneck?
See HERE

space@pe

doesnt work in ccc though.

__________________

Q9650 Club

Pheatton

In GPUz there is a log option. You can run that while running a game. That will tell you what temps and clock rates that card is running. If you want I can post SS of mine running in 3D and 2D mode. The card running at 500 for the RAM and GPUs is fine when not running a 3D app.

__________________

laurie

I have managed to force the higher clocks for 3d mark.
However it will not set the clocks higher itself. I would guess because of the low resolution it runs in.

__________________
Do not shop at overclockersuk
Do shop at watercoolinguk

Will your CPU be a bottleneck?
See HERE

Bullant

Thanks for the reply,i have worked it out a bit more.I,ve managed to get a score of 21000 in 3DMark6 so it must be working fine,and must be in 3D for that score?

laurie

Sounds like it for sure. The clocks seem to go down if you are not in full screen.
21k is very good! I get just under with my system.
How do you have your CPU clocked

__________________
Do not shop at overclockersuk
Do shop at watercoolinguk

Will your CPU be a bottleneck?
See HERE

Bullant

Hi Laurie,
Yeah cpu was at 4mhz

Attached Thumbnails

 

laurie

Nice FSB you have on there. What do you have your NB voltage set to?
Mine seems to overheat far too quickly with this card next to it.

__________________
Do not shop at overclockersuk
Do shop at watercoolinguk

Will your CPU be a bottleneck?
See HERE

Bullant

Hey Laurie,
NB voltage is at stock,but i have the nb ,vid volt at 150 that is what really helps.I sometimes bring NB volts up a bit tho,but that when i want to pust the NB fre up to say 2600.