xBuddhax

Ok 1st things is take a deep breath. You're getting a little too impatient and you're gonna make people upset cause you're whining. Stop that or you won't get answers.

2nd, you don't want to change the voltage on your AGP. Reason why is because the card will not handle it. You will fry you card if you do. One main reason why AMD boards can't be overclocked as well because the PCI and AGP cannot be locked on alot of boards and the vid card or pci card craps out not allowing your pc to boot. They do have the option to increase the voltage in BIOS but just leave it at locked. You will do more harm than perfermance increase my changing the voltage. All you need to do is slowly increase the core and memory speeds to overclock your vid card. There is no more to it unless you are good at doing volt mods with resitors which I highly doubt.

Increase core a little bit then memory a little bit. Look for artifacting. Little lines in the picture. Once you start getting artifacting, slowly lower back whatever you increased (core or mem speeds) until the artifacts dissappear. That will be the max your card can handle.

Be advised that you will not get any insane increased on a vid card compared to a CPU. You will at most get maybe an extre 10-30 Mhz on your core and memory with stock cooling. Will this make a difference. Absolutely not. You'll get maybe and extra 50 points on 3dmark'03.

__________________
xBuddhax

P4 3.0C @ 3.6 Stable
Idle 27C/Load 38C
Themralright SP-94 (Cooling CPU)
Swiftech MCX159-P (Cooling NB)
1 gig OCZ EL Gold PC4000
DFI Lanparty Pro875B rev. B1
ATI Radeon 9800XT @ 440/762
2 x WD Raptors (Stripe 0) 36 Gigs
Plextor 708A CD/DVD burner
Coolermaster Aerogate I
Coolermaster Cooldrive 4
Coolermaster Musketeer I
Matrix Orbital MX222 LCD
Mitsumi 6 in 1 Memory Card Reader/ Floppy
Soundblaster Audigy 2 Platinum EX
X-Superalien Case

killacamaro

thanx bro soo.. thanx fopr ur help

DeathONator

Didn't I explain this to ya over MSN?

Good advice on the overclocking buddha! Depending on the model and goodness of your card you might get the core to over 30mhz increase on stock.

__________________
Fold for the cure & team 37726!!
H2O cooling: Chevette heatercore, 172mm 258CFM fan, Apogee GT, and Ehiem 1250. Load temp @ 1.45vcore 41C.

vIbes

my crappy gf4 mx420 is curently running on 315 MHz core speed and 418,5 MHz memory speed. so far so g... great!

Lord Xeb

Get it to 320!!!

__________________