ECS KA3-MVP Extreme Bios
Posted 03-03-08 at 03:21 AM by Kamikaze127
In my KA3 Bios(Manufactured November 2007) I do not have a HT Link adjuster.
I have so many options besides the HT link, which is one i need to overclock my 5600+ even higher. The board uses a enhacned version of Pheonix Award Bios. Last time i tried updating. i had to use Top-Hat flash to make the system usable. I would like some help plz!
Thank you!
I have so many options besides the HT link, which is one i need to overclock my 5600+ even higher. The board uses a enhacned version of Pheonix Award Bios. Last time i tried updating. i had to use Top-Hat flash to make the system usable. I would like some help plz!
Thank you!
Total Comments 1
Comments
-
Here, Here! I thought I was loosing my mind. First of all, I'm new to overclocking and I have this exact board with the same manufacture date. In my research on the web (relating to this board) they kept talking about the HT multiplier and I couldn't find it in the bios. I flashed the bios with the latest version, but still couldn't find it. Hopefully someone out there will offer some sugestions.Posted 03-04-08 at 11:02 PM by upsmichael
