Case Mod #1 - Overclock.net

RedSix · 09-03-07

Well, here goes. This is my first case mod and it is a warm-up for my big project... but more on that later.

This is an old Antec case I had in the basement so I though I'd try to breath some life into it.

As you can see it was designed on the Death-by-Beige principal.

RedSix · 09-03-07

Here are the case parts after priming and I am ready to start laying down some color.

RedSix · 09-03-07

The Rebel Insignia and crescent bracket I cut out of 16ga. Not sure that I am going to use the bracket at this time. I intend to mount these parts over the window plex and they are to be backlit by an led fan. I am just not sure that I like the end result at the moment. Likely the bracket is going into the recycle bucket.

Danker16 · 09-03-07

that really nice and oh my GD! the checkpoints from Star wars shadow of the empire for the N64 i almost forgot about those!

whe3ls · 09-03-07

looks pretty

chem_opa19 · 09-03-07

Rep + for using the rebel insignia. I approve.

RedSix · 09-03-07

I am actually thinking I need to go with a bigger insignia cutout. Large enough to span the window. Then cut a pattern into the insignia for airflow, so I can mount the LED fan to it.
I can then mount the smaller one to the front of the case.

09-03-07	#1 (permalink)
RedSix Case Modder Join Date: Aug 2007 Location: Kentucky Posts: 14 Rep: 1 Unique Rep: 1 Trader Rating: 0	Case Mod #1 Well, here goes. This is my first case mod and it is a warm-up for my big project... but more on that later. This is an old Antec case I had in the basement so I though I'd try to breath some life into it. As you can see it was designed on the Death-by-Beige principal. Attached Thumbnails

09-03-07	#2 (permalink)
RedSix Case Modder Join Date: Aug 2007 Location: Kentucky Posts: 14 Rep: 1 Unique Rep: 1 Trader Rating: 0	Here are the case parts after priming and I am ready to start laying down some color. Attached Thumbnails

09-03-07	#3 (permalink)
RedSix Case Modder Join Date: Aug 2007 Location: Kentucky Posts: 14 Rep: 1 Unique Rep: 1 Trader Rating: 0	The Rebel Insignia and crescent bracket I cut out of 16ga. Not sure that I am going to use the bracket at this time. I intend to mount these parts over the window plex and they are to be backlit by an led fan. I am just not sure that I like the end result at the moment. Likely the bracket is going into the recycle bucket. Attached Thumbnails Last edited by RedSix : 09-03-07 at 05:59 PM

09-03-07	#5 (permalink)
whe3ls goad ting i r dislekxic Join Date: Feb 2007 Location: spokane washington Posts: 15,869 Rep: 825 Unique Rep: 543 Trader Rating: 59	looks pretty __________________ Total Posts: 666 (6.66 posts per day) Private Messages: Unread 0, Total 666. Project:Fishy updated: 5/10/09 best thread ever washington state overclockers the 450 dollars folding rig that will amaze you does your E21x0 have a fsb wall E6600@4.005ghz Q6600@4.005ghz click me 892/2000 spent

		Overclock.net - Overclocking.net > Case Mods & Cases > Case Mod Work Logs
Case Mod #1

09-03-07	#7 (permalink)
RedSix Case Modder Join Date: Aug 2007 Location: Kentucky Posts: 14 Rep: 1 Unique Rep: 1 Trader Rating: 0	I am actually thinking I need to go with a bigger insignia cutout. Large enough to span the window. Then cut a pattern into the insignia for airflow, so I can mount the LED fan to it. I can then mount the smaller one to the front of the case.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)