[Complete] SR-1 (Antec 900 Mod) 56K warning! - Page 13 - Overclock.net

soundx98 · 01-09-08

Perhaps the feel of handles is best determined by those that use them.

I did want something:
a) that looked Industrial/Commercial/Professional Strength
b) had a very low profile
c) were "rounded' so they wouldn't be cutting into things.
d) they're really not as much for "lifting" as for "tipping",
the case is starting to get pretty heavy as we keep adding gear, nice to have something solid to grab onto.
e) unique, I've never seen an Antec 900 with handles before.
("Eww Marge look at that, an Antec 900 with handles
Mmmm, Handles<drools>)

The mirror window does make the handles blend into the case more.
I've got the case sitting on the dining room table.
I think I walk by it 50 times a day.
The handles are on it but not permanently secured.
Usually if I still like something after two weeks it's a keeper.

I'm still working out how to mount them and reinforce the top section.
I could see the plastic top being completely ripped off if the handles weren't secured through the steel top.
Course the 200mm fan isn't gonna make the fit easy for handles.

Good day so far, managed to find the screws I needed for the Zalman 9700 LED and the missing DFI cable that connects to the Bernstein Audio Module.
Got a couple of plaques ordered as well.

And I really appreciate the input from everyone.
('cept Ceedub cause he's really fugged up in da haid)

Herr Sandman · 01-10-08

Nice! :d
that mirror acryll, what price did it have?

soundx98 · 01-10-08

Thanks for the approval.

$29.95 for the sheet at www.frozencpu.com
But I really, really like it now that I have proper lighting in the case.

Run N. Gun · 01-10-08

I don't think it would be too hard to mount the handles through the plastic and into the metal top. Thinking out loud here...I wonder ... would the metal top support the whole weight of the case (only has 4 rivets), if you were to use the handles to carry it? Maybe if you put a strip of aluminum on the underside of the metal top for support (parallel to the handle), drilled out with the two holes for the screws? That would distribute the forces better and not mess with the 200mm fan.

What if one of the handles was above the rear 120mm fan on the rear of the case (i.e. not on top at all)? That spot seems to be really reinforced.

As I look over the case, this is very doable for either tipping or *gasp* lifting.

*prosser13* · 01-10-08

Sounds to me like the main problem is the size of the 200mm fan in the roof meaning that you can't put rods straight down as the fan is in the way?

soundx98 · 01-10-08

@Run N. Gun & prosser13

Bam.
You both are on the same wavelength as me <very scary>
a) Yup, I think I'll need to do a little reinforcing.
b) Yes, I need to clear the fan (and it's really big).

But I think it's all do-able.
Still looking at the handles to see if I'll like them on a permanent basis.
(even started carrying a photo of the handles in my wallet.)

*prosser13* · 01-10-08

Any chance of some pictures with the top off and the handles where they are on the plastic top?

If I'm being greedy feel free to set radodrill on me

soundx98 · 01-10-08

Quote:

Originally Posted by prosser13

Any chance of some pictures with the top off and the handles where they are on the plastic top?

If I'm being greedy feel free to set radodrill on me

LOL, Are you looking for something shot straight down from above the fan?
And the handles placed where I think they are gonna go?

Yes, I will be taking the top off (again) but I'm doing a slow "un-build" right now.
Seeing where things looked "great" and things that were just "OK".
(Lot of stuff to pull out of this sucker, and I still need to decide what to monitor with the Dallas One-wire probes)
I'll be in Chicago next week so you'll need to bear with me a bit.

And I promise to send some wallet-size "nekid" rig photos to you and that other perv, Run N. Gun

I wouldn't worry about radodrill.
Seems he threw his back out in a "pleasekillme" Throwing Contest trying to impress the girls.
As soon as he heals a little he'll be starting the "radoBase" section of the SR-1.
(you got seatbelts on that chair don't ya?)
-----------------------------------------

Hate to veer off topic (again) but Jebus, Amazing all the kewl stuff google finds for “Zoltan”

"Be at one with the water"

YouTube - Zoltan

the guy in the middle looks like a very tall “hoss”
(I think he is Zoltan and the other two guys are "followers")

http://www.zoltanrocks.com/z/band022002a.html

“Tommy can you hear me? Tommy can you hear me now?”

http://people.tribe.net/zoltan

and Zoltan, Hound of Dracula”

http://www.stomptokyo.com/movies/zol...f-dracula.html

The preceding has been brought to you by the “Zoltan for President” Foundation.
Send PayPal donations to pleasekillme@www.dangthathurtssumthinfierce.com

Quote:

Originally Posted by ErBall’s Signature

-Hold on, now, so yer telling me that you put these little guys in boiling water and they shriek and they turn red and they die.

-Yes

-That is the most metal thing I ever heard in my whole life. High five.

Run N. Gun · 01-10-08

Carl, was that you in an old home movie?

So, just how long have you been Zoltan?

Having watched that video my life is forever changed...and my eyes won't go back together either.

Seriously tho - I just took a look and I'm pretty sure there is room to mount one or both handles through the plastic and metal tops.

soundx98 · 01-12-08

Some pics of the underside of the top.
The bolts will clear the fan

Yellow is where it looks like the bolts need to go

But now if I can find the correct size "posts" (fat ones) to put the bolts that secure the handles/case top/"posts"/steel top of case through.
I may not even need those plastic "tabs" there

Some more shots (from the top) as I look at positioning.

Also shot the case/handles with the AC Ryan AcrylMirror Panel in place.

Kinda reminds me of the "Gattling Gun" from Futuremark

I think they blend well into the "Industrial" look.
----------------------------------------------

I'd also like your opinions on the Corsair PSU.
It has a "Corsair 620" decal on either side.
(I hate the red)

Of course it will be flipped over in the SR-1 (fan up) and the "Corsair 620" decal is upside down.
Kinda makes it look like you were high or a tard when you assembled it. Or Both.

So I tried it with a little of the "Chrome Aluminum" vinyl from MNPCTech that I used on the drive cage area.
Sort of an accent.

other possibilities I can think of are;
a) remove red Corsair decal carefully and replace it correct orientation (ie, non-tard)
b) Use new roll of "CarbonFibre" vinyl from MNPCTech in the decal area (or all) of the PSU.
c) Remove the "Corsair 620" decal completely (totally black side, nekid)

Not sure how to tackle the Decal on the fan hub.
Unit has NOT been opened (or tested) and I'd hate to void another warranty.
--------------------------------------------------

Been doing a lot of reading about the DFI mobo.
Always exciting to use a DFI motherboard.
They seem to "fly" or "fail"

What else can I say
I'll either be "high-fivin" or "cryin"

That's an Enzotech aftermarket cooler
http://www.frozencpu.com/products/55...?tl=g40c16s229

Board came with it and a spare Bios chip (never leave home without it).

Man, I can't wait to get that E8400 and put this sucka together.

"And then"
Overclock the mofo
"And then"
Assemble the case
"And then"
Mount it on the "radoBase"
"And then"
"And then"
"And then"
"And then"

So any thoughts? comments? suggestions?

		Overclock.net - Overclocking.net > Case Mods & Cases > Case Mod Work Logs
[Complete] SR-1 (Antec 900 Mod) 56K warning!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)