|
|
 |
Overclock.net - Overclocking.net > Case Mods & Cases > Case Mod Work Logs | |
[Project] Gir/Syrillians' Test Bench Log
|
||
 |
|
|
LinkBack | Thread Tools |
05-01-08
|
#1 (permalink) | |||||||||||||
|
Extreme Cooler
|
[Project] Gir/Syrillians' Test Bench Log
Murphy's Law hit me today. This is now just a test bench log.
__________________
I love Syrillian more than Pook and Namrac
Last edited by TnB= Gir : 05-18-08 at 04:55 PM. |
|||||||||||||
|
|
|
05-01-08
|
#2 (permalink) | |||||||||||||
|
Extreme Cooler
|
All updates listed here
Update 1
Update 2 Update 3 Update 4 Update 5 Thank you Syrillian!  Update 6 Update 7 Update 8 Update 9 Update 10 Update 11 Update 12 Update 13
__________________
I love Syrillian more than Pook and Namrac
Last edited by TnB= Gir : 05-24-08 at 10:26 PM. |
|||||||||||||
|
|
|
|
05-01-08
|
#3 (permalink) | |||||||||||||
|
Extreme Cooler
|
Day 1: Cleaning and taking apart AC unit
This is going to be the sneak peak of the chiller build and all you'll get for around a week or two as I'm moving to a new house during the next two weeks.
AC unit taken apart. Radiator looking thing closest to me is the cold part, one farthest is the hot side radiator. Kind of like a TEC in a way.  Up close of the cold side radiator that will be dipped in the cooler to chill the water.  I still need to figure out a poor mans way of cutting the aluminum sheet and cutting the plastic. Ideas are welcome
__________________
I love Syrillian more than Pook and Namrac
|
|||||||||||||
|
|
|
|
05-01-08
|
#4 (permalink) | |||||||||||||
|
Wayfarer
|
*subscribes*
|
|||||||||||||
|
|
|
05-01-08
|
#5 (permalink) | |||||||||||
|
Realm of Illusion
  
|
Interested in seeing the progress on this one
|
|||||||||||
|
|
|
|
05-01-08
|
#6 (permalink) | ||||||||||||
|
Intel Overclocker
|
Subscribed, sounds interesting
|
||||||||||||
|
|
|
|
05-01-08
|
#7 (permalink) | |||||||||||||
|
Extreme Cooler
|
Thanks guys! I have it running in the garage right now with the temperature prob stuck in a cup of hot water so that it doesn't shut off
 Let's see how cold this thing can get In the end though, I will be tuning it so that it keeps the water at a steady 5C, as my pump and waterblock are only good down to 0C. It will still be a good 10-30C drop in temps though.
__________________
I love Syrillian more than Pook and Namrac
|
|||||||||||||
|
|
|
|
05-01-08
|
#8 (permalink) | |||||||||||||
|
Extreme Cooler
|
Yummy
__________________
Aumotocnic "An unfortunate member of the overclock.net insomnia club"
|
|||||||||||||
|
|
|
|
05-01-08
|
#9 (permalink) | |||||||||||||
|
Extreme Cooler
|
Here is a nice little frost picture for you guys
It appears that straight out of the box, with NO INSULATION at all, this chiller maxes out at 18F/~-8C Not bad at all, not bad at all  EDIT: After taking off the fan blowing on the cold side rad, I was able to hit -20F
__________________
I love Syrillian more than Pook and Namrac
Last edited by TnB= Gir : 05-02-08 at 07:53 AM. |
|||||||||||||
|
|
|
|
05-01-08
|
#10 (permalink) | ||||||||
|
Where's my /b/?
|
How much horsepower? What refrigerant? BTU?
Just curious, because me and a friend are doing the same with a 3/4 HP rotary running on R22.
__________________
My FAQ's: Port Forwarding If I ever had a transaction with you, please fill out my heatware! Don't forget to stop by the Intel ES CPU Club!
|
||||||||
|
|
|
|
| Tags |
| chiller, girface, test bench |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
