SmasherBasher

IMO, you shouldnt have much if any of a problem.
CR sorry to jack the thread, but I'm gonna post a video of Bill Owen himself doing a window mod with his U channel.

__________________

CattleRustler

no problem, I dont have the dimensions off hand, I think he has them on his site

the 1/8" was for a case BEZEL which is thick plastic, as opposed to case sheet metal. Dont get 1/8" for case sheet metal it will be way to loose

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop

wastedtime

I read the thread backwards and saw over 70 posts of "Its looks awesome CR" till I reached post #936.

And this is what I have to say

It looks awesome CR

__________________
Never agrue with an idiot. They drag you down to their level and then beat you with their experience.

Complete - Gemini -Lian-Li PC-Q7 Mini-ITX

In Progress: ANT - NZXT Rogue SFF

Completed: Storm

Completed : Azure - A Rack Server Mod

CattleRustler

rofl, do you always read threads backwards

either way, thanks Wasted

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop

wastedtime

ha ha.. yes I read them backwards

But that does not work for Syrillian's threads... I would spend an entire day reading his threads If I didnt use the update list on the first page.

__________________
Never agrue with an idiot. They drag you down to their level and then beat you with their experience.

Complete - Gemini -Lian-Li PC-Q7 Mini-ITX

In Progress: ANT - NZXT Rogue SFF

Completed: Storm

Completed : Azure - A Rack Server Mod

CattleRustler

The Intelligence - Day 34

new shop lamp, top is simulated diamond plate

went to home depot and got a 10 pack of T8's, and compared them against regular T12's, the T8's win a bit bluer but way brighter, and 8 watts less per each

formulated a set of cieling mounts for sheet rock

plunged a phillips head thru then ground out with a flat head



used pliers to delink the chains to 3 links each side, to allow 5" hang (3" is code)

theres the mounts all ready for the lamp

bladdau

closed the door and snapped some pics, no flash going off - teh woot!

theres the clear coated handle from last week. it was forgotten under a bag in a contraption

used the contraption for the handle backplate, we'll come back to this guy

Goodies!

Gemini II S, a Silenex 120 red led fan for it, another 60mm red led fan for case (1 got stolen by NB cooler), a tube of AS5, a red IDE cable for the dvd, a eps psu extension, and the heling hands man (wink)





bright light!
hahaha

decided to get busy on the black acrylic (I know somewhere Syrillian's ears just perked up)

2x2 black cast acrylic, 1/8"

scored it a few times

SNAP!



began cutting out the switch face plate and the trim piece for it





busted a blade along the way. I was milking this blad for all it was worth. it was bound to happen. no worries, replaced it and kept going

tucked the scroll saw back into its nook (castor frame I made for it is really a nice thing)

test fitted the inner part

these guys will get more work tomr

RED, she said, all I see is RED!
Thats the handle back plate getting the treatment, first coat

after three coats I put her to bed under a bag and of course forgot the pic. did a papparazzi on her ass...

rusto clear for the mobo pan

now that my drop light is free to roam I mad use of it by the door as light was fading

I cleared my test piece earlier and it turned a ghastly white within 20 mins. I have seen this before on pieces that haven had enuf time to set but this piece was painted a week ago so I am assuming the clear will clear itself. so I proceeded to prep to clear the mobo pan (big risk)

not sure why I took this pic

anyway, cleared the mobo pan and it also started to turn white. I am hoping by tomr the clear is clear. If not (by end of tomr) I will sand the mobo pan (light scuff 400), hit it with a coat of red. let it dry 48 hours, then reclear it with Krylon.

Thanks for watching



* This Worklog post was generated using WorklogCreator - Version: 1.0.0.7
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop

repo_man

Looking awesome my man! The clear will clear up as it dries. All the rattle can clears I've ever seen turn milky like that. No worries

__________________



Current Projects --Sanguineus Cinis Cineris
Completed Build Log's -- Hinges for Syrillian's Silentium // Project: Phoenix // Flip this Tower

SmasherBasher

Any difference in letting it sit for 48 hrs vs the way I've been clearing (5 min after color coat begin clear then 2 mins between coats)?
Here is how my mobo tray came out

I cannot wait to see the culmination of all your hard work. This is one of my favorites.

__________________

Ducky

You always taunt and tease us with not showing the case :P Great work CR, that looks to be a rather good scroll saw too. Where did you grab it from and for how much?

__________________

nategr8ns

amazing work, this is coming together very nicely
btw, TF2 is pretty much the only game I play now, rivaled only by Diablo II. I also play a tad of Audiosurf .

If it's not too much of an imposition, can I have your steam name?

__________________