Scratch: [Completed] The Intelligence - Page 14 - Overclock.net

**repo_man** · 07-08-08

Vitamin C - the highest mg ones you can get. I have 300mg ones and usually take one a day. First sign of a cold coming on I boost up 2-3 tablets. Knocks it out no time flat. Massive amounts of vitamin C are the shiz.

It not big doses of tablets, at least get you some daily ones. They help alot, with many things. Really helps my arthritis

CattleRustler · 07-09-08

yeah, on monday when I felt like I was starting to get sick I should have did the vit-C bomb, but I didnt

By tuesday I fealt like death. I actually went into work because I didnt want to call in sick, but I left an hour later and came home. I am out again today, but at least today I dont feel like death, just like death-warmed-over.

khoiwin · 07-09-08

Quote:

Originally Posted by CattleRustler

thanks

could be epic, or it could be epic phail... remains to be seen - either way it should be fun, thanks for watching

I'm leaning toward the former

CattleRustler · 07-09-08

Quote:

Originally Posted by khoiwin

I'm leaning toward the former

thanks

:guzzles-orange-juice:

**repo_man** · 07-09-08

Quote:

Originally Posted by CattleRustler

yeah, on monday when I felt like I was starting to get sick I should have did the vit-C bomb, but I didnt

By tuesday I fealt like death. I actually went into work because I didnt want to call in sick, but I left an hour later and came home. I am out again today, but at least today I dont feel like death, just like death-warmed-over.

At least it's pogress! lol. Glad to hear your feeling, at least marginally, better bro

CattleRustler · 07-09-08

thanks mate

CattleRustler · 07-11-08

back from the dead with a small update...

The Intelligence - Day 03

Made a nice atx mobo template out of acrylic and bam, cracked it drilling the holes

No problem, still useable, its on the non-business end anyway. Ill glue it tomr

I needed an acurate mobo template with the holes, and the abilty to see thru it - acrylic to the rescue

tested it out in an atx case to make sure the drill holes were right etc. all ok

used the template to recreate my last tests. everything still checks out level and ok

got the goop ready (JB Weld)
I sanded the case spot and the rails you see facing up with 400, then cleaned with iso 91%, and let it dry 15 minutes

mixed equal parts, or there abouts

, of the goop

used a plastic card to "trowel it onto the rails of the u-channel, then stuck it to the case. No turning back now...

(ps Repo, it was NOT runny, it was like TAR! lol)

it cures in 4 hours but I'll set it overnight and check in the morning

If all goes ok with that, and it passes the stress test tomr morning, then I will mount the other two bases and begin on seating the upper rails (threaded screws + some jb weld). From there let the case cutting begin - muha!

thanks for watching

* This Worklog post was generated using WorklogCreator - Version: 1.0.0.6
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

Syrillian · 07-11-08

cracked corner.

*sigh* ...I know that all too well. What are your plans for that?

Other than the bit-mishap, it's lookin' great.

CattleRustler · 07-11-08

Quote:

sigh* ...I know that all too well. What are your plans for that?
Other than the bit-mishap, it's lookin' great.

thanks Syr, well since the acrylic was only a template and not part of the build my plans are basically nothing

I may glue the corner on for good measure but thats about it. And it was my own stupid fault, I pressed to hard while drilling

**repo_man** · 07-11-08

Well, I'm glad it was tar-like for you. It's too runny for my modding tastes

I would let it cure at least a full 1-2 days before I tapped into it. Just to be on the safe side.

It looks good! Minus the acrylic mishap

, but that's totally fixable (isn't it?)

		Overclock.net - Overclocking.net > Case Mods & Cases > Case Mod Work Logs
Scratch: [Completed] The Intelligence

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)