CattleRustler

thanks. All I used was blue tape, and made sure to press the edges well a few times, especially right before paint. then when I painted I didnt spray at low angles, I sprayed as perpendicular as possible to the face

thanks mate

cheers brother

haha - go for it! thanks

thanks Syr. I have been using that drying method for a while now, albeit cardboard boxes over smaller painted parts. It really helps. I cant take credit, someone else suggested it (forgets who) during Gumdrop iirc. I repped that person back then.

Hey syr, did you see my rouging pics an update or two ago? I was curious what you thought. I think it came out ok. I didnt spend epic amounts of time, and it doesnt look as good as your masterful work, but its way better than what it was.

thanks Dragoon. I am trying for somwhere in the next 10-14 days or so, considering I dont work on it every single day, but I will as much as I can

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop

Tator Tot

Just got to see the stripe today CR,lookin great, specially after my binge TF2 playing last night!

__________________
Check Out My Sammich!Aumotocnic"An unfortunate member of the overclock.net insomnia club"
Missouri Overclockers
The ß₤ứə Çřёώ
The Red Tide ATi Owners Unite
nVidia's Gr33N Machine

WBaS

That stripe came out really nice, especially considering you had to cover red with it! Nice work

__________________
"Give a man a fish, feed him for a day. Teach a man to fish, feed him for a lifetime." -Lao Tzu

CattleRustler

lol, thanks

thanks

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop

CattleRustler

Just had a quick look at the bottom of the case that was inner cleared (drying inside that big box), its looking good, and crap-free in the finish

too bad I didnt use that drying box when I originally painted the case, especially the insides, some crap in the black but oh well. The outsides have been color sanded and will be dried in there when cleared so it should keep crapola-in-finish to a minimum

I'm starting to get excited as the finish is approaching

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop

edwardm

cooooooool

__________________
CPU-Z - GPU-Z - F@H

pjlietz

Can't wait man!

__________________
Proud member of the Official All-Canadian Club!!!
All shall fall if they don't fold for overclock.net
MY MOD LOGS
TT Armor Logs - Project Work Log: My Armor Reborn - Project Work Log: The Throne for my Armor
TT Mozart Logs - Project Work Log: Pete's Monstrous Mozart - Progect Work Log: Pete's Monstrous Mozart Overhaul

CattleRustler

cheers fellas

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop

CattleRustler

The Intelligence - Day 44 - Phail Stencils, win clear coats

First things first, even tho it was 62 today, needed to break out the oil filled heater

letter stencils to cut out the words "TOP SECRET" onto blue tape

all went well

until I tried to remove the tape
EPIC PHAIL

couldnt waste time on origami bs, so I decided to get as much paint based stuff done as I could while I had warm temps and extra heat

I ordered the quiksteel but I couldnt wait around for it to get here so I painted the latch brackets

4 coats prime

4 coats Krylon black gloss

Ill clear them another day

case lid needed clear inside, taped off

prepared a bed for it, as dust free as possible

case bottom that was already inner cleared was ready for outter clear. used a box to raise it off the surface

prepared the same type of raised surface so when it was done I could drop it on there and not worry about the rim touching anything etc

ready to go...

like the other clearing I didnt want to linger with pics and chance crap in the finish so I blew 4 coats of clear and hid that sucker in the drying box.

I know it doesnt make for good worklogs taking pics of stuff thats hidden but bare with me mates, the shweet pics are coming

no modding tomr or sunday
back at it monday eve
thanks for watching



* This Worklog post was generated using WorklogCreator - Version: 1.0.0.7
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop

Tator Tot

Kinda sucks about the letters man, better luck next go.

Painting is looking superb though. Keep it up mate!

__________________
Check Out My Sammich!Aumotocnic"An unfortunate member of the overclock.net insomnia club"
Missouri Overclockers
The ß₤ứə Çřёώ
The Red Tide ATi Owners Unite
nVidia's Gr33N Machine