CattleRustler

cool, thanks for that information EuroFix
+rep

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop

lattyware

I have one of those fans in a big air cooler I have. I warn you that it gets dusty even with a dust filter, pretty fast, and also, is comparatively noisy in comparison to a normal fan for the amount of air it pushes. Still, I think it'd probably work best.

I'd recommend making a frame to hold it off the ground if it's sideways, for both stability, and to keep the airflow going.

__________________
Lattyware | Main (Sig) Rig: gBOX42 | Lan Rig: gLAN42
Never been convinced by Linux? Here is a challenge. | Using LVM
Scratched Disc? | Guide To LAN Parties | Writing a GUI application in Python/Glade
Etching an image into your case. | Wireless Access Points: Easy wireless networking.
A Member Of The OCN Anime/Manga Club
"I disapprove of what you say, but I will defend to the death your right to say it." --Evelyn Beatrice Hall

CattleRustler

yep, a frame, or stealthed feet
I was thinking of a frame that is hinged, with permanent feet on the right, and wheels on the left, that would allow you to open the case while its upright, without removing it from the frame. Just an idea.

thanks for the suggestion lattyware

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop

lattyware

No problem, it'll be an epic case if you manage it. I'll be watching this one closely.

__________________
Lattyware | Main (Sig) Rig: gBOX42 | Lan Rig: gLAN42
Never been convinced by Linux? Here is a challenge. | Using LVM
Scratched Disc? | Guide To LAN Parties | Writing a GUI application in Python/Glade
Etching an image into your case. | Wireless Access Points: Easy wireless networking.
A Member Of The OCN Anime/Manga Club
"I disapprove of what you say, but I will defend to the death your right to say it." --Evelyn Beatrice Hall

repo_man

@ Rustler - Yea I thought they might be roller locks as well, wasn't sure. It seems the are though, whoops!

I'll go make myself comfortable at the snack table now *wanders to the table*

__________________



Current Projects --Sanguineus Cinis Cineris
Completed Build Log's -- Hinges for Syrillian's Silentium // Project: Phoenix // Flip this Tower

xShiFTx

Yet again.. You caught my attention! sub'd.

__________________


Still a work in progress

CattleRustler

cheers people
Im off to the shop to continue on Gumdrop
cya's later

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop

Arjy

This is gonna be so awesome!

__________________

My Watercooling Log

CattleRustler

due to a few setbacks during the final days of the Jessie's Gumdrop build, this project is on a temporary hold until I can get those final bits sorted. I will be starting on this, in earnest, as soon as possible.

thanks, CR

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop

xHassassin

Couldn't you work on this mod while you wait for the scroll saw to get replaced?
Anyways, hope you can finish the Gumdrop build soon!

__________________

Failed Projects
------
Aztec Ambiance
Troglodytic Tech Terminal