CattleRustler

i read their docs, it mixes as it comes out and produces one bead. tube is reusable

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop

Indignity

Ahh I see there is a special nozzle on that one.

I use this same crap, but different manufacturer all the time. It's not forgiving at all lol

__________________

cbrazeau1115

Woot for not being incorrect. I have had some stuff like this in my basement from when I used to make mini scateboards out of balasa wood layers.

__________________

Project: The Templar

CattleRustler

Just got home, made a pitstop at the HW store - they impressed me today...

they actually had a 2 3/8" bimetal holesaw which I am hoping will yield 2 1/4" mesh disks, and they also had that Devcon 2 ton epoxy that Repo posted, but not the one that mixes in the tip I got it anyway since it has a 30 minute work time as opposed to about 2 mins with the jbweld kwik. Also picked up a few other items I needed for around the workshop. Im off to the shop to do some more work on the project, I shall return in several hours with pics

thanks for watching

edit: almost forgot, I swapped the q6600 out of my sig rig and installed the q9450, all ok with that, so the build now officially has a cpu for when its ready. Tonight I will swap the video cards

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop

CattleRustler

The Intelligence - Day 11

Last night, about to install the TRUE120 on the Q9450 in the sig rig , so the project rig can have the Q6600

today, some goodies from HW store

2 3/8 holesaw, Devcon 2ton epoxy, a hammer , a round file, and a 10 inch phillips head screw driver (ham-hand issue behind true last night, dont ask )

set up my general purpose and aluminum tap fluid flasks, what a luxury this was compared to what I have been doing

ok down to business, made a holesaw jig for the 2 3/8 saw

set up some mesh

heres the cut out on the right (no pilot plunge) compared the hand-cut version from the other night

just a tad too small for the 2 1/4 fan hole
...

So I flew back across the street to the HW store and picked up a 2 1/2 holesaw, like I originally planned (but changed mind when I saw 2 3/8 was available)

made another jig for the 2 1/2

here's a cut out disk from the 2 1/2

after a tad of filing... epic win
no tape, no thumb, haha

so I started cutting out the remaining disks, on the third one there was an accident. I pulled the drill out of the jig before it stopped, the disk moved around, things went flying, luckily away from me and my junk, and I ended up with this monstrousity...

ok, carefully cut moar, thats the last one about to go

the fruits of my labor...

the top two were filed and test fitted, the bottom 4 still need filing (tomr)

before I left the shop I decided to reinforce my psu mounts with some more JB Weld. I know it looks sloppy but it will be sanded and painted so no worries




Still more a ton to do, in various genres, but I guess I will decide tomr what comes next. Thanks for watching, stay tuned

* This Worklog post was generated using WorklogCreator - Version: 1.0.0.6
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop

Manyak

Looks good!

And if it make you feel any better, I would have probably screwed up EVERY one of those vent covers.

__________________
For Sale: [Conus] CM Storm Scout, TEC, WC, Laptop, A900, Model M, GPU, Audio, and a ton more!!

CattleRustler

thanks, no wrries, it was very easy to screw up, as you saw with the bent to sheot one

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop

nategr8ns

Nice work! Yeah, the 2 3/8" hole saw left a gab about the size of the hole saw blade .

So how are you going to be mounting these grills? That's going to be just as tricky as cutting them :\

__________________

wastedtime

Looks great CR. Glad you are having a pretty good day at modding unlike me... Mine was absolutely pathetic.

__________________
Never agrue with an idiot. They drag you down to their level and then beat you with their experience.

Complete - Gemini -Lian-Li PC-Q7 Mini-ITX

In Progress: ANT - NZXT Rogue SFF

Completed: Storm

Completed : Azure - A Rack Server Mod

CattleRustler

thanks. jbweld, from the inside mentioned 10x above

thanks, sorry to hear that mate. Ive been skimming the various logs, so I have to catch up

__________________

[Current Project] PolymorphiX v2 (alu & steel alu hybrids)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and drop