masbuskado

yes they do, but you can check @ their site too...

__________________
The Long Nail - Modder @ New Mod City, NY

DiHydrogenMonOxide

Or if an Ace hardware is near buy they probly have over a hundered kinds of dremel tips and assesories. I know my local small one does.

SmasherBasher

What ever happened to this project?

__________________

t4ct1c47

t4ct1c47 likes.

__________________
3DMark06: 26220 3DMark Vantage: 21711 i7 920 @ 4.4Ghz

BlankThis

I've seen this before...

I like the etching

~B~

__________________

cky2k6

yeah, its not dead. i'm just really busy with school, and need to save up funds for all my grand plans, lol. the window will probably go. its pretty scratched up, and the border did not work out. i will cut out the etching though, not wasting several hours of work... i will replace the window with mesh, and secure the etching to the mesh, paint it in uv red, and place uv ccfl's on the other side of the mesh. it should look wicked in the dark...

thats not the biggest part though, I will likely install two water cooling loops soon, with those sweet ek multioption reservoirs for both loops, and red uv reactive die. some other minor stuff is case handles, aluminum casters, a divider for the bottom section, kama bay, and possibly a 5.25" bay lcd display. I hope to try to start it in the lull between midterms.

__________________


I'm a performance fanboy.

cky2k6

Okay, so I'm back on it. I decided to hold off on the gpu loop, and start off with the cpu/board. Honestly, I'm doing it more for the looks, as the cpu is fast and cool enough, but the thrill of watercooling draws me against my better judgement So far, I ordered a kama bay and 4 feet of c-channel from petras, and I already have mesh laying around I plan on using.

Parts list
Scythe Kama Bay
c-channel molding
a.c. ryan radgrill
petras mcr320 and yate loons combo (gtx 360 is too expensive for its minimal gain, unless I can find a really good deal on it)
apogee gtz
mcw30 chipset block
thermalright mosfet cooler
w/e generic p.o.s. i can find for the sb cooler
mcp665 vario
ek res 250
red u.v. paint
primoflex pro black tubing
u.v. red coolant
lian-li aluminum casters
lamptron (weird name...) case handles
dd compression fittings for cpu and nb
dual 12" uv cathodes
orange led strip
cord clips for better cable management.

__________________


I'm a performance fanboy.

cky2k6

sorry for the quality, second week that I forgot my digital camera at my dorm...

__________________


I'm a performance fanboy.

Indignity

Nice job!

If you need some inspiration, check out Bill Owen's tribute

__________________

cky2k6

Last updates for a while. Installed the kama bay, and got a better picture of the new side.

__________________


I'm a performance fanboy.