Shiryu_Libra

hey that's awesome....
and with the phenom will be a Great Rig

__________________
"Are You Part of the problem, Part Solution or part of the background"
Hi from Altar Desert, Sonora, MX.
Shiryu_libra

remingtonbox

DAYUM that paint looks awesome, I would never guess that it is rattle canned

dustandechoes91

Update #10 1/7/09

Sorry for the low quality pics, the are from my phone...

So for this set up ill be recycling most of my old watercooling setup, however i was able to get some new parts, and they finally came:



Yesterday when the box arrived I opened it up to check everything out right away. I was pretty amazed by the heatsinks and was toying around with them, not paying attention to the radiator or tubing, as i saw both a large radiator box and some tubes sticking out of a bag. Now usually when I get tubing I go on over to micro center and buy a pre-packaged bag with somewhere between 4 and 6 feet of tubing. Since I am so used to that(buying it in a sealed pack), i never even thought to look for this:


So man was I surprised when I got this:


12 inches. I ordered 12 inches of tubing to do my entire case. Man do I feel dumb.

I was still able to make a temp setup which should keep me going for a few more days:

Attached Thumbnails

       

nafljhy

i like how you have the face palm in your picture. can't wait until you get moar tubing.

__________________
SALE! - Custom Brass Mounts - Custom Stinger V8

I Fold, Do You? - Multi-GPU2 Guide - Brass Bottom Boys GPU2 Team

Projects: Serenity - Quantum
Completed: Valkyrie - Techstation - BrassIe - FaHRack

Kasper

This thing is going to look epic.

+sub

__________________
(>'.')> - - - *

dustandechoes91

Update #11 1/14/09

Ok so I finally finished off the other side panel and got the window mounted. Although you cant really see it in the pic this thing i is just as mirrored as the other panel:


Next thing I got done was the front piece. As with above, this thing is mirrored too, you cant really see it in the pic, but there is a small reflection in the bottom right corner. Also all this stuff is kinda dusty, the chasis is a dust magnet and has been sitting for two or three weeks so I got dust on my fingers when handling it and the fingerprints are on the front piece in the pic:



Next job is to sleeve that ugly hole. I will use this old coaxial cable for sleeving:


Cut out a chunk without any print on the side:


Starting to gut it:


All hollowed out:


And sliced down the center:


Going for the right fit:


Gluing it down:


And done(note all the dust):


Finally, I was going to finish the top piece and finally be done with the case, but it had some flaws so I guess ill have to repaint it. Fun.





And finally, in order to motivate myself, I took one of my 8800gt's out and put the new waterblock and unisink on it, so no pc gaming till its done.



So the tubing, clamps, and coolant are in the mail and should be here friday, however I leave friday, im heading out to wyoming to do some good ol' snowboarding. Anyways, expect another update later next week.


Thanks for viewing. Hope I finish this soon, if you haven't noticed I started this thread on July 21st

Shiryu_Libra

hey that's great....
using the coaxial rubber with some sillicon.. nice

how many layer of paint do u use???

__________________
"Are You Part of the problem, Part Solution or part of the background"
Hi from Altar Desert, Sonora, MX.
Shiryu_libra

noahmateen1234

Good job on the case! I love the white/black look! You should sleeve all teh cables black and then put white heatshrink on them. Also get those Xigmatek fans with white LED's and 2 12" white cathodes. That way the inside will have some white to contrast with the black. Obviously it is up to you but that is how I would do it.

__________________
How to share files between Windows and Mac
Interior Case Painting Guide
4890 @ 1ghz GPU clock, 1100mhz Mem Clock

We Are The Red Tide

.: ATI HD4800 series club :.

Jolly-Swagman

Hey this is looking might Awesome paint job ,,, well done,

__________________

The Sled Acrylic Tech Bench | Smooth-n-Fold Cube Case Mod | OCZ Vendetta 2/AC-Freezer 7 Bolt Thru Mods | External CMOS Reset Key Switch
Folding@home-T32

iandroo888

i noticed how all these black n white cases are popping up. (after mine anyway) lol. o well. its a good thing. means i picked the right colors for everyone to see xD

__________________

We Are Gr33n Machine | The ß₤ứə Çřёώ | The Cooler Master 690 Club | OCN Headphones Club

My Sale Thread !!! Come check it out !