Case Mod: [Project] Serenity - Page 4 - Overclock.net

nafljhy · 09-18-08

gah! i've run into the same problem as CD. the powersupply isn't facing the direction i want. the fan that is. might hav to ask CD to create PSU panel like the one made for his current log.

that and i've run into space limitations already. i have no idea how i'm going to fit everything in. i might have to put two of the four pumps into the bottom section.

nafljhy · 09-22-08

Day 6

been awhile huh? well a small mod this time.

this is the scythe kazemaster front panel ontop of a lian li bay panel.
taped and ready to outline then cut.

here is the finished cut w/ acrylic window

and another shot of it with the acrylic showing. now i'm just waiting on some screws so i can connect the controller to it to see if it will work like i want it to.

* This Worklog post was generated using WorklogCreator - Version: 1.0.0.7
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

nafljhy · 10-04-08

Day 7

so i went to frozencpu and picked up lots of stuff. i got around 12 rubber gaskets for shrouds since feser is stupid and made it so you can't use it side by side.

picked up 100ft of 1/4" black sleeving

100 ft of 1/8" black sleeving.

30 ft of 1/8" black heatshrink

30 ft of 1/4" black heatshrink

haha.. yea.. most of the sleeving that i picked up for valkyrie has been used up.. well 1/8" anyway.. but the 1/4", i still have an ok amount of. i know i won't be needing to pick up any more sleeving and heatshrink for a long long time.

here is a shot of how i think i'll be arranging 2 of the 4 pumps... the last two will be in the lower compartment sitting on top of the fans. using the UN Z-bracket with pump stands.

in all honesty, i haven't gotten far at all with this build... hopefully it'll start picking up once i get the rad grilles so i know where i need to start cutting.

until next time my brethern!

* This Worklog post was generated using WorklogCreator - Version: 1.0.0.7
* Free Download: http://www.mod2software.com/worklogc...logcreator.zip

Ducky · 10-04-08

Those pumps are sexy!

nafljhy · 10-04-08

Quote:

Originally Posted by Ducky

Those pumps are sexy!

thanks!

miggs78 · 10-05-08

nice stuff nafljhy.. that case is huge isn't it?

I like those bitspower barbs really..

Show4Pro · 10-05-08

I envy your awesomeness!

Btw, Where did you get that powersupply extension?? I would kill for one of those!

PhelanJKell · 10-05-08

nafljhy,

You figure out what your going to do with the powder coating? You going to have it assembled and then painted? or broken down? I'll be getting my rocketfish done, possibly, so I have the same question on my mind! Let me know, thanks!

wastedtime · 10-05-08

This is one huge mod. I love the idea of putting both rads at the bottom

Subbed

nafljhy · 10-05-08

Quote:

Originally Posted by miggs78

nice stuff nafljhy.. that case is huge isn't it?

I like those bitspower barbs really..

yea..the case is really big.. haha, i like the BP barbs too! i had d-tek high flows before but these just blow those out of the water!

Quote:

Originally Posted by Show4Pro

I envy your awesomeness!

Btw, Where did you get that powersupply extension?? I would kill for one of those!

thank you but i'm not that great.. i got the powersupply extension at performance-pcs, but they also have them at sidewinders now. only difference between the two is that p-pcs has more variety of the LED colors while sidewinders only has blue.

Quote:

Originally Posted by PhelanJKell

nafljhy,

You figure out what your going to do with the powder coating? You going to have it assembled and then painted? or broken down? I'll be getting my rocketfish done, possibly, so I have the same question on my mind! Let me know, thanks!

yea, i did.. its broken down to get powdercoated. that big square of a chassis is going to be powdered midnight blue. and anything that goes inside is being powdered white. and some little bits are going to be powdered black but not too sure if you'll be able to tell the blue and black apart. we'll see when it gets done

Quote:

Originally Posted by wastedtime

This is one huge mod. I love the idea of putting both rads at the bottom

Subbed

yea, it is pretty big and its kicking me left and right. as much as i like having both rads down there... its a tight fit for two 480GTXs.

cheers guys! thanks for dropping in!

hopefully, i'll have another update for you guys soon!

View Poll Results: Style of Case Feet
Solid Look	6	42.86%
Break in the Middle	8	57.14%
Voters: 14. You may not vote on this poll

		Overclock.net - Overclocking.net > Case Mods & Cases > Case Mod Work Logs
Case Mod: [Project] Serenity

10-05-08	#36 (permalink)
miggs78 New to Overclock.net Join Date: Mar 2008 Posts: 75 Rep: 1 Unique Rep: 1 Trader Rating: 0	nice stuff nafljhy.. that case is huge isn't it? I like those bitspower barbs really..

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)