systemaxd

As you may have guessed this is another Rocketfish case mod. Not planing to have any outstanding painting or any painting done to the case. Though i am planning to maximise the interior space while preserving as many drive bays as possible and while keeping cable management at a 9/10 or 10/10. Oh and almost forgot there will be 2 radiators mounted internally a MCR320 and MCR220.

CPU temps are real good 41C idle 46c load @ 1.45vcore

Attached Thumbnails

     

Shiryu_Libra

seems to be a good job, I keep an eye on it, to see the progress.... sounds good

this "Mod" thing, gets my attention

__________________
"Are You Part of the problem, Part Solution or part of the background"
Hi from Altar Desert, Sonora, MX.
Shiryu_libra

KoolMan

sounds good i keep an @y@ on this thread

systemaxd

Didnt exactly hold true on what i had said earlier but 3 picture update time of both radiators mounted in the case with details on the cut outs done.

Didnt want to remove all the center structure other wise no support is left to hold the case together.
MCR220 radiator


MCR320 radiator


Cut out of top of case for radiator.

Attached Thumbnails

     

go4life

I like it! give us some pics of how it looks inside

__________________

systemaxd

Been meaning to update for a few days now but just got my PC back up and running since my motherboard died on me had to reinstall windows and instead of xp decided to jump to vista big update on some of the inside of the case and what is to come soon in a later update.

HDD bays original gap closed up and moved forward


Just enough room for the side panel to slide on


aluminum angle iron what might this be used as....


Size of the angle iron


Thin aluminum sheet metal you should have a good idea where this is going.....

Attached Thumbnails

         

__________________
Build log of Rocktfish case mod now finished Water fish

prracer6

__________________

I fold for my Grandfather and family friend Jimmy (stomach cancer) RIP 11-7-08
Folding since 10-29-08 FOLD for OCN 37726

tht-kid

Looks good, subb'd.

Check my project out, you might like it.

__________________

MomijiTMO

Should be good

systemaxd

Update again lots of parts and pieces coming together so to start seeing the big picture of how all of the parts look in final placement

Cut out of the sheet metal took 2hr with dremmel


No not just looking at the PSU but look at the angle iron cut outs and riveted to the border of the case


Cut out for power cords and/or sata wires to board


Full side shot of the bottom of the case with all parts in


Inside shot that you couldn't see clearly of the MCR220 rad mounted in earlier post.

Attached Thumbnails

         

__________________
Build log of Rocktfish case mod now finished Water fish