ryanlusk

Sorta curious on what your plans for the top fan are , do you plan on making a plastic thingy like the 900 has or what ?

__________________

Diesel Phreak

Right now nothing, All I'm doing is cutting the honeycomb off and replacing with a wire fan grill. I also noticed that the top 140mm that came with the case has spot for four 5mm LED's I plan up wireing up some and sticking them in there.

__________________

My Antec 300 Case Mod

ryanlusk

Ahhhh , if I do something similar , I'm gonna try and rig something up that's similar to top bit.
Kinda makes the look methinks.

Good luck !

__________________

RileyRR

Nice, and subbed. I should be getting my Antec 300 next week. Then I am ready to start down this same road. I hope to add the CM holes as well, so it is good to see where you are placing them. I would also like to do the fan cut-out for my PSU, but that may be overly ambitious for my first time modding...

One question, could you explain what you mean by Stealth Sunbeam Rheobus fan controller? I also have a Sunbeam Rheobus that I will be installing. I am curious what you intend to do with it.

ryanlusk

Usually when people say something is gonna be stealth , like a drive or something , they mean they're gonna hide it behind parts of the case , most likely the mesh grill on the front , but I'm not sure how he plans to be able to access it easily , maybe like a window or something ?
Not sure.

__________________

Diesel Phreak

What I'm doing with the Fan controller Is, I'll take off the faceplate that is on the Rheobus stock and then I'll take one of the 300 drive bay covers and drill 4 holes into it so the knobs can go through, so it'll match the case and thats why it's called "Stealth"

I cut all the CM holes today, fan grills and PSU fan hole. Pics soon to come after finished uploading. And I put all of my parts in the case, and I notice a big difference in sound since cutting out the honeycomb grills.

__________________

My Antec 300 Case Mod

ryanlusk

That's a good idea , I wasn't sure how you were gonna do that.

Pumped to see pics.

__________________

-iceblade^

this looks cool, and i like what you did with the front blue LED's

subbed

__________________

LiquidForce

I tried to do that but the metal mesh made me mess up when I was drilling the holes. 2nd cover I removed the metal mesh and drilled the plastic first, then snipped the metal mesh so that the knobs would fit through. I really recommend that as I was pissed that I messed up that cover because I was too lazy to do it right.

__________________
For Sale: [US]PS2, PS1, KVM, Print Server

HARDER STYLEZ OF OCN CLUB

TIGER DIRECT

Diesel Phreak

Thanks for the heads up, because I can't afford to loose a cover, I'm using the other one for the stealth DVD drive. +rep

__________________

My Antec 300 Case Mod