[Complete-Ish] Antec All Black, NEW GTZ TOP PICS *PAGE 1* - Overclock.net

Foxy@OC'D · 06-15-09

GTZ Top not the best pics, camera is crap

pics don't do it justice

will be installed when I take my rig apart for a clean and installing my new graphics card.

her she is all powered up and after a well deserved clean - I don't own the best camera on earth but here goes.*really should get a new one*

and ty for the MOTM nomination well appreciated

Foxy

__________________________________________________ ________________________________

Case:-
Antec 300 obviously....

Mods list-
-Side window.
-Front mounted 240mm rad- was going to be on top but the top 140mm in the 300 halted that idea.
-Remove all HardDrive bays to leave just the 3x5.25 inch bays
-False wall *maybe*
-Cable Management holes
-Paint chasis *Black*
-Colour sheme black-red, Only things going to be red are two 120mm led fans and the coil springs and I might intergrate some red into the decal.
-Custom decal *placed somewhere*
and thats all I can think of atm
-Change airflow of case*
-sleeve/braid things *LOL*
-Stealth cd drive *stolen idea* only a maybe
-extend psu cables if they arn't long enough which I think the won't be

*update*
Items already
-Spray paint essentials- Primer-paint-laquer-sand paper
-3mm Acrylic Clear, C channel, No more nails super strong double sided tape, Jigsaw blades.

Arriving in the morning hopefully between 8am-12pm GMT *fingers crossed* 18/06/09
-Antec 300
-XSPC 240mm Rad
-4x Yate loons-2xBlack 2xRed led
-Coolant - Primochill BloodRed
-anti-kinks - black
-16ft xspc 3/8th clear tubing
-240mm Rad Grill- Black
-5.25 inch hard drive convertor
-some more 4mm heatshrink
-Black hose clips 10pk
-10m of black&yellow AWG18 [24/0.2mm] cable
I think thats everything

soo saying this I should be able to start today if most of the things arrive.

And my ideas changed again, coolant is now going to be blood red instead of black, And the coil springs are going to be black instead of red, wouldn;'t of hand any clour in the case if it was all black

Foxy@OC'D · 06-15-09

Reserved

alex98uk · 06-15-09

Good luck.

Sheehanigans · 06-15-09

There is a how-to floating around here of a guy that did a beautiful blue finish with rattle cans, if someone knows where that is...

But in a nutshell, primer, thin, even, multiple layers, let dry for 1 day, color, thin, even, lots of layers, wetsand if desired, more layers, more wetsand, clearcoat, lots of layers with lots of light sanding.

Clear coat is good for protection and gives you that beautiful deep automotive like shine. You can get a satin clear coat if you just want protection.

Foxy@OC'D · 06-15-09

HAHA thanks alex

Soo in other words I should clear coat for a better finish/protection

JerseyDubbin · 06-15-09

Quote:

Originally Posted by Foxy@OC'D

HAHA thanks alex

Soo in other words I should clear coat for a better finish/protection

yes it will help prevent scratches etc.

Acoma_Andy · 06-15-09

How about making it a true Foxy edition and put something like this on it

I know, you don't have to take it seriously.

Foxy@OC'D · 06-17-09

I'm currently in the process of designing the logo but im starting to be sick of the site of photoshop its either not looking like i expected or will just look **** when applied, but I will have a few more attempts at some ideas I have, but at the end of the day if it looks c*ap it wont go on the case