Finished: Internally water cooled CM690 - Overclock.net

doat · 06-21-09

Some of you know that i had a plan to install a dual stealth radiator on the top of my cm690. I planned it out and came across a few issues but worked through them and i end result is this.
I cut the plastic area first that was blocking my radiator

Then i cut the metal mesh grill on the top, took a few blades.

Today i cut out the area where the radiator would sit

This is how it would sort of look like

I filed down the edges to give a bit more room for the radiator fans

The holes i drilled for the zip ties

End product and i found that i did not need the zipties at all

I had to make some last minute adjustments with the plastic on the top panel and currently the radiator is sitting slanted but right now i am just exhausted and my body is aching. Thank you all for looking and thank you Juggalo and others who have helped.

freakb18c1 · 06-21-09

Minttttttttt

doat · 06-21-09

Thx freak, i did have a tiny leak from a damaged tube but nothing major.

slngsht · 06-21-09

Man I wish I would have seen this a month ago. I ended up getting a triple rad and had to mount it on top.

mocha989 · 06-21-09

for the fans at the top inside of using a dremel i would have used a jigsaw to gu jsut straight on so you dont have those the wierd jaggies. but oh well it looks good. just so some filing and what not.