Psycho666

hey all,

a few days ago i got some acryl, which i accidently set against some MDF plates

so? big deal...right? RIGHT! that IS a big deal...for me
for me it felt like a sign...a sign to mod...to mod like i've never moddedered before

anyways...i've made some sketches (sorry no 3d...i`m old )


the bottom plate is MDF, there are 2 small sides off MDF, and 1 small MDF plate in the front...the other 2 plates are gonna be Acryl.
hopefully it'll all be stable enough

anyways, i`ve already drawn a few lines on the MDF and acryl...gonna saw them to pieces tomorrow


the lines on the acryl...the dots/plus' on the left side are for mobo standoffs.


the MDF...the left lines are for the vertical plates. the right lines are for the bottom plate.

i hope this all makes sense to you...hell i hope it all makes sense for me lol

Cheers

__________________

CattleRustler

good luck

__________________

[Current Project] PolymorphiX v2 (aluminum)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop

Psycho666

thanx CR, gonna need it

never did a "techstation" before...for that matter...i never even saw one in real life.
so this is gonna be fun

anyways, this is just a temporary place for my sig rig so i can mod my 1200 properly

__________________

CattleRustler

__________________

[Current Project] PolymorphiX v2 (aluminum)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop

Psycho666

little update: i'm sawing up the MDF in the garden of my parents...while it's 31c!
and ow yeah...get this...that temp...is in the shadow

i'm slowly melting here

so if this is my last post...it was nice knowing you all...
i'm off sawing some more MDF

__________________

CattleRustler

87.8 F is nothing mate
walk it off

__________________

[Current Project] PolymorphiX v2 (aluminum)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop

noahmateen1234

Dude that temp is nothing, just like CR said. I grew up in MN, I have seen -40 and colder. I have been in 108 degree temps. Try those and tell me what you do then lol.

But on the modding side, good luck! I am gonna get the inside of my case powdercoated once I move, but before I do that, I am gonna build an acrylic tech bench, so I will be following yours for ideas.

__________________
How to share files between Windows and Mac
Interior Case Painting Guide
4890 @ 1ghz GPU clock, 1100mhz Mem Clock

We Are The Red Tide

.: ATI HD4800 series club :.

Psycho666

first of all...i can`t stand the heat...i just want cold weather...preferably dry

but as you might have noticed...i survived
so...update

Both MDF and Acrylic


Close up MDF


Close up Acrylic


Tomorrow i`ll start drilling some holes and get started on assembly.
hopefully it`ll all be done tomorrow so i can start the weekend by tearing down my sig rig

__________________

Psycho666

well...i finished the drilling part
and also the painting part
at first i wasn`t going to paint it but i spilled some coffee over it (don`t ask) so now i had to

here are the parts all drilled and ready (before coffee-spillage )



here are the parts after the primer + paint...drying in the sun
(looks awefull on pics )





so the sides are matt black, the rest is Metallic Violet (Purdy Sparkly Pruple )

__________________

CattleRustler

you may need another coat of paint, but lets see pics after its dry first

__________________

[Current Project] PolymorphiX v2 (aluminum)
[Pending finish] Butcher's Hook (Slipknot tribute bench in steel)
[mod2hardware] All Modding Projects by CattleRustler
[mod2software] WorklogCreator 1.0.1.6 visually build postable worklogs, quickly & easily with drag and drop