|
![]() |
Overclock.net - Overclocking.net > Case Mods & Cases > Case Mod Work Logs | |
Case Rebirth: [Project] Second Chance: Antec 900 Xtreme Modding
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | ||||||||||||
|
Overclocker
![]() |
Project Second Chance Giving an original Antec 900 a second chance at life and an Xtreme makeover Introduction Well this case has quite a history behind it and let me say it has seen better days. While not bad in the sence of aesthetics, the overall compatibility with large hardware is a bit on the bad side. This original Antec 900 was owned by a good friend of mine and it was his first gaming rig. We built it together years ago. Needless to say he slipped into the world of the PS3 and lost interest in the PC world. The case suffered a bit of damage while in his ownership which I will show below in the pics. Finally after he had it sitting there for a while the OS had gone south and the damages it suffered led him to part it out. I sold most of his parts except the case after few months he told me I could have it. So I proceeded to try the case out. After installing all of my current hardware into this case I soon noticed the pain I would have to deal with when taking anything out or new installing parts. I used the case for bout a month and then it sat now I am giving it a second chance! I am going to do everything I can to make this case look nice and have perfect cable management. Original Photos of case ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() It got really dirty and wasn't cleaned very much. Near the end he broke the top 200mm fan and dented a few of the front covers in. Original Hardware CPU- AMD Athlon 4000+ 2.4GHz 1MB MB- ASUS A8N-E Socket 939 NF4 PCI-E DDR RAM- PNY 2x512MB DDR 400 GPU- BFG 7950GT OC 512MB GDDR3 PCI-E HDD- WD Caviar 250GB 8MB SATA Optical- Memorex CD/DVD reader IDE PSU- Coolermaster 500W OS- Windows XP 32-Bit Home Future Hardware Specs(could change) CPU- Intel Core i5 750 2.66GHz 8MB L3 95W MB- Gigabyte P55-UD4P Socket 1156 RAM- G. Skill 2x2GB DDR2 1333 9-9-9-24 1.5-1.6v GPU- Nvidia GTX280 1GB GDDR3 PCI-E 2.0 HDD- WD Caviar 250GB/Seagate 250GB/WD 1TB SATA Optical- LITE-ON CD/DVD Burner SATA PSU- Corsair 750TX OS- Windows Vista Ultimate 64-Bit Objectives
-Mock up parts and get rough measurements for cutting holes -Cut hole for PSU cables -Cut 2 holes motherboard cables -Cut hole for 8-pin CPU power -Cut hole for front panel connectors -Cut holes for hard drive cables -Cut hole for CPU cooler back plate -Sand interior of case -Prime/paint inside of case Tools and Materials -Basic hand tools -Cordless drill /50mm Hole saw -Dremel tool -Jigsaw -Hand files -Primer/Spray paint
__________________
Last edited by Rick Arter : 4 Weeks Ago at 09:51 PM |
||||||||||||
|
|
|
|
|
#2 (permalink) | ||||||||||||
|
Overclocker
![]() |
__________________
Last edited by Rick Arter : 4 Weeks Ago at 10:09 PM |
||||||||||||
|
|
|
|
|
#3 (permalink) | ||||||||||||
|
Overclocker
![]() |
Reserved for final pics
__________________
|
||||||||||||
|
|
|
|
|
#4 (permalink) | |||||||||||
|
Overclocker
![]() |
This should be an awesome mod!
__________________
|
|||||||||||
|
|
|
|
|
#5 (permalink) | ||||||||||||
|
Overclocker
![]() |
Thanks alot of the cutting and such has been done except the hard drive area. Just posting all the progress up until now got a few vids as well.
__________________
|
||||||||||||
|
|
|
|
|
#6 (permalink) | |||||||||||||
|
Damage, Inc.
![]() |
*sub-diddly-scribes*
Cheers to you for breathing new life into an old friend.
__________________
WIP: Scarab Custom Cases: Silentium, Halcyon, Indigo, Gemini, Prometheus, Anvil Case Mods: Liquid Chameleon, VF1000 LAN box Semper Fidelis
|
|||||||||||||
|
|
|
|
#7 (permalink) | |||||||||||||
|
S my D IW!
![]() |
Good luck Rick
![]() ~B~
__________________
|
|||||||||||||
|
|
|
|
#8 (permalink) | |||||||||||||
|
Intel Overclocker
![]() |
looking forward to the finals good luck subbed
|
|||||||||||||
|
|
|
|
|
#9 (permalink) | |||||||||||||
|
between projects
![]() |
oooooh - resurrection!
im in
__________________
YO DAWG I HERD YOU LIKE CASE MODDING SO WE PUT A CASE IN YO CASE SO YOU CAN MOD WHILE U MOD [Current Project] PolymorphiX v2 (alu & steel alu hybrids) [Pending finish] Butcher's Hook (Slipknot tribute bench in steel) [mod2hardware] All Modding Projects by CattleRustler [mod2software] WorklogCreator 1.0.1.7 visually build postable worklogs, quickly & easily with drag and dropMOTM's: 6/08 2nd Place
12/08 1st Place 2/09 1st Place 8/09 1st Place
|
|||||||||||||
|
|
|
|
#10 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
sub'd, <3 antec 900 mods
__________________
|
|||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|