kennymester

The psu is a variable power supply from Ace Hardware. I just took apart the case and glued the circuit board into the outdoor switch housing. As for the upper shelf it is kind of bent because orginally I cut through the aluminum to cut out the center hole. Now the piece isn't quite square and it either bunches up or down. As for the shelf support, it is bolted into the side of the wood.

__________________

DuckieHo

There's a 3-for-2 sale at www.nexfan.com and some laptop coolers included.

__________________
To answer most of your questions: (1) a fridge cannot cool a PC (2) 64-bit OS for over 3GB or so (3) PCIe 2.0 is backwards compatible with PCIe 1.x (4) Resolution, not screen size (5) If you have a question, it is not news (6) Read TOS (7) Report, not respond to Spam (8) Uninstall nTune (9) Single/Non-Modular Rail PSUs are NOT better than Multi-Rail/Modular (10) Edward is the Law!

K092084

one laptop sits on the top and the other laptop sits on the bottom, on top of the fans.
For those that were asking.

SpookedJunglist

Sir your laptop case cannot be stowed in the overhead bin therefore must be stowed under the plane

__________________

kennymester

I'm actually going to be putting this on ebay pretty soon if anybody is interested. If I get 35 rep in the next two weeks I'll sell it on here. I think I'm going to sell it for about 20 bucks plus shipping.

Reason: I found a desk at a garage sale for 10 dollars and I modded two fans into the bottom of the table.

__________________

zuknivek

My laptop got really hot like all laptops do and this is my solution: