calvin924597

While my rig is down I thought I would do a little work on my case... except I can't think of what to do to it.

What are some ideas for mods to my case?

Thanks.

Retrospekt

A fan hole on the top would be cool.

One other great idea is for cable management. The centurion 5 is already a great case to cable manage, but you can make it better. Drill holes in the motherboard tray by the 20 pin connector, so you can just string it behind the mobo and through the hole. Make holes in different areas of the motherboard to hide the cables behind the tray. It looks so good after.

__________________

chem_opa19

I've actually been trying to think of some modding ideas for my centurion as well. If you haven't already, you could always do a quick paint job on the inside.

__________________

To Do List

1) Paint inside of case.
2) Get side window.
3) Mirror on bottom of case.
4) Light the case up!

Syrillian

Blowhole
Window(s)
Lighting (UV or Cold Cathode)

UV is cool as you can paint (or use pens) the caps and other components in the case to make them glow.

__________________
Silentium ~ Arcane Arts

Semper Fidelis

"Illegitimi non carborundum"

h4rdcor3

I'm thinking about trying to get a 120 in the front.

Syrillian

Here is a mod that I did on an old Antec case:



I super-glued the fan to the stock bay covers after I had cut them to size:



It helped my struggling CNPS9500 a lot... and since it was mounted to the stock bay covers the unit snapped into place (no other hardware needed).

__________________
Silentium ~ Arcane Arts

Semper Fidelis

"Illegitimi non carborundum"

chem_opa19

Ooo, were you going to put the 120 in the extra HD bays? I've always thought about doing that, might be kinda loud though.

__________________

To Do List

1) Paint inside of case.
2) Get side window.
3) Mirror on bottom of case.
4) Light the case up!

h4rdcor3

I was either going to try drill some holes and replace the 80 or like syrillian did and put it in the 5.25 bays. If i did the drive bays i would put it behind grates because i really like the look of the front of the case

calvin924597

I already have a side window, I like the interior paint idea, would high-gloss red look good?

And I think I may try to put a mirror on the bottom, that would look awesome.

And the cable management idea is really good too.

Rep for everyone!

Rick Arter

Blowhole for PSU
Top 120mm fan exhaust
Cut front open to get air to the 120mm
Cut out grills on case
Paint inside/outside
Cold-cathode light?
Mirror is good idea!!!
Wire management/sleeving
High gloss red FTW if your good painter/sander flat if not???

__________________