bullcrew

Modded Lian Li pcv1000 + Extreme cooling!

--------------------------------------------------------------------------------

Well I thank everyone who had inputs on cases and I ended up getting a Lian Li pcv1000b+2 and couldnt be happier.
I wanted the 2k but couldnt find one so I got the 1k then modded my freezone elite which gave me the room and looks sweet!

Heres the mods:
- Notched back of 5.5 case area to house wires
- mounted HD tray in upper cabinet under the 2 drives
- fan integrated in front (took 3 stacker 5.5 covers mesh and made a fan tray)
- took Coolit freezone ELITE apart and mounted pump and radiator in lower case
- Did a silverstone system temp/fan monitor and integrated into the complete system
- mounted a 110cfm 120mm rear fan blowing in and a 80mm 83cfm fan to top that will be complete tomorrow.
- Carbon fiber (vinyl) covering tray and divider.

the vinyl has been heated down as well (2 ridges near hd)

Attached Thumbnails

         

__________________
3DMARK06 13882
http://service.futuremark.com/compare?3dm06=3365267
Pi 1M 14 sec Pi 32m 14.43.
ROCKIN A Coolit FREEZONE ELITE!

theartist

Links = 404 not found

__________________

Signature your on it put, backwards this read to enough dumb were you if.

95.567% of people make up the stats in their sig. If you are part of the 4.433% who uses real stats, put this in your sig.

Other Rig

bullcrew

I load themn and they load fine then I check them in edit and they are fine. As soon as I go to this post they are red x's. Its a forum issue not mine. I loaded them elsewhere no problems. I deleted them and reloaded and they loaded fine again.
So to moderators please help!!!!

__________________
3DMARK06 13882
http://service.futuremark.com/compare?3dm06=3365267
Pi 1M 14 sec Pi 32m 14.43.
ROCKIN A Coolit FREEZONE ELITE!

afzsom

Host them on imageshack in the interim, I'm interested to see this.

__________________
Watercooling Loop: MCP655 Vario -> Black Ice GTX360 -> D-Tek FuZion V1 -> MCW-60 -> MicroRes
Loop Cost: $395.03

Best. Thread. Ever. || C1E/EIST/SpeedStep Fix || Undervolt and Overclock your CPU! || GPU-Z Benchmark Settings || GPU-Z Stock Settings || Lian Li Owner's Showcase || Lian Li Group

bullcrew

pics are up.

__________________
3DMARK06 13882
http://service.futuremark.com/compare?3dm06=3365267
Pi 1M 14 sec Pi 32m 14.43.
ROCKIN A Coolit FREEZONE ELITE!

Starholdest

Sweet

Heru

Very nice start, dude.

Have you considered getting rid of that god-awful optical drive bezel,removing the actual drive's bezel and painting it? Just make sure to pop out the clear plastic for the LED light or taping over it before you paint.

Maybe paint the panel to that top bay device, too.

Oh yeah. Lights! Lots of pretty lights!

EDIT: If you want a power switch to replace that plain one, try checking out these Bulqins. They fit perfectly through the hole and you can order then pre-wired.

http://www.frozencpu.com/cat/l3/g44/...yle-Page1.html

Also, another thing to consider is a alternate window and panel design.

http://www.frozencpu.com/cat/l3/g43/...ows-Page1.html

__________________
Is your excess equal to that of your deficiency?

bullcrew

Cool thanks! Im ordering a zalaman fan controller and the switch (x2 1 for reset) blue. Im going to cut the fan screen out of the door and go ahead and put a full peice of plexi with 2 120mm (blue LED) 103cfm fans aiming at the board (1 over gpu and cpu/NB area).
Im a;so doing a 83cfm 80mm fan in the lower section on the backside internal for the PSU and the Freezone for maximum air flow.
Some UV paint (move the cathodes) and a few blue neon sticks to light it up!

__________________
3DMARK06 13882
http://service.futuremark.com/compare?3dm06=3365267
Pi 1M 14 sec Pi 32m 14.43.
ROCKIN A Coolit FREEZONE ELITE!

RonindeBeatrice

Very good stuff. I love the LianLi V series. They are some of the sexiest cases IMO.

__________________

awa1990

how did you mount the HDs like that?
i am looking to do something like that too.

__________________

Overclock.net Ps3 Friend list