bcham

i just got a coolmaster c5 case ,but i cant get the lcd lights to come on or the hard drive.ive noticed a single pin green wire + and a single pin white wire- where do these go on my mother board,asrock dual sata.ive tried the orange wire (lcd) in the pin header but it wont work,any ideas would be appriciated,

[S]teel [R]eign

It turns on right?

__________________

FOR SALE: FOXCONN MARS + BONNEVILLE HEATERCORE W/ SHROUD

bcham

yea it turns on.usb works and sound,

Mr. Mojo

The green and white wires are for your power LED. Some case manufacturers split them instead of doing the 3 post plug with only 2 wires...never have figured out why as every ATX mobo I've ever seen had a space in the PLED header anyway. Make sure you have the polarity right and that you're skipping a space between the wires.

__________________

bcham

my chat wont work,
where do i plug them in,do i plug them in next to the reset and power button header

Mr. Mojo

It should be labeled on the mobo itself, and it's usually in the manual as well. Look for a diagram near the front panel connector on the mobo for PLED and IDE or something similar. I've never even seen an ASRock mobo in person so I can't tell you for sure what the name will be.

__________________

bcham

i found pled there was just 2 pins so i i pluged them in there and it works,cheers for the inf.

Mikeandike212

mine never worked. ever.

__________________