modding supplys.. where's the cheapest place? - Overclock.net

darkninja420 · 02-21-08

doing a big mod here soon.. need quite a few things..

15ft of c-channel molding
5x 120x25mm fans @ high cfm
black/carbon psu sleeving kit
14ft 1/2" tubing
7ft of clear/red anti-kink coils
8x worm hose clamps
2x120mm rad grill
cheap dremel w/ accs
3m #4010 tape
biocide(anti-algae)
blood red dye/additive(uv if avail but must still be blood red w/o lights)
uv dye/additive(if avail)
2x d-tek high-flow 1/2" fittings
grey primer paint (3-4 cans)
flat & low-gloss black paint (3-4 cans)
dark/blood red paint (3-4 cans)
clear coat paint (2 cans)

again i would like to find these at one store but i know this isn't possible.. so the fewer stores the better.. and cheaper is better since im still on a tight budget ><

direct links please.
online only im iced/snowed in for a while!

estores should take cc or google checkout as i dont do paypal!

multiple stores ok.. would just like to not buy from 10 different stores here and pay more in shipping then i did for the stuff >_>

iandroo888 · 02-21-08

i dont think you'll be able to get all those in one place.. you're probably going to have to go to a few different sites/stores

Syrillian · 02-21-08

Hi darkninja.

As iandroo stated, it may be difficult to assemble this shopping list in one location.

Here are the places that I have found to be reputable and enexpensive (without a lon-term hunt).

15ft of c-channel molding: Automotive store (door molding)
5x 120x25mm fans @ high cfm: Petra's
black/carbon psu sleeving kit: HSC (local to me), but an electronics liquidation center will have bulk.
14ft 1/2" tubing: Petra's
7ft of clear/red anti-kink coils: Petra's
8x worm hose clamps: Local hardware store
2x120mm rad grill: not cheap... but MNPC Tech has some great ones
cheap dremel w/ accs: Big box store, or local hardware
3m #4010 tape: Local Paint store
biocide(anti-algae): Petra's
blood red dye/additive(uv if avail but must still be blood red w/o lights)
uv dye/additive(if avail): I use FLuid XP... but it costs. Food dye may work, but you may not get the "Blood Red"
2x d-tek high-flow 1/2": fittings: Petras
grey primer paint (3-4 cans): Local paint store
flat & low-gloss black paint (3-4 cans): Local paint store
dark/blood red paint (3-4 cans): Local paint store
clear coat paint (2 cans): Local paint store

Sorry... I know you wanted a one-stop shopping list...

markkleb · 02-21-08

I dont think you can find a "cheaper" dremel than this
http://www.harborfreight.com/cpi/cta...emnumber=94076
(I wouldnt build a house with it but it works fine for modding)

mnpctech has a pretty good deal on molding
http://www.mnpctech.com/UChannel.html

darkninja420 · 02-22-08

i'll have to be getting all this online.. ice storm here and i wont be able to get out until its completely gone :/ which can take a week if not more >_<

so online links to best prices is best.

dremel i have already bought.

so i still gotta find the rest..

direct links is a + all those who help are getting +Rep

edit: what ive got so far:
Petra's
Tubing 7/16" MasterKleer 14ft
C-Channel Molding 11ft

SVC
4x CM 120mm Fans

Performance-PC's
blood red dye
3M #4010 Tape

complete total including tax/shipping $66.46

of course thats excluding the dremel.

whats left to get..

15ft of c-channel molding
4x 120x25mm fans @ high cfm
black/carbon psu sleeving kit
14ft 1/2" tubing
7ft of clear/red anti-kink coils
8x worm hose clamps
2x120mm rad grill
cheap dremel w/ accs
3m #4010 tape
biocide(anti-algae)
blood red dye
2x d-tek high-flow 1/2" fittings
grey primer paint (3-4 cans)
flat & low-gloss black paint (3-4 cans)
dark/blood red paint (3-4 cans)
clear coat paint (2 cans)

Indignity · 02-22-08

Quote:

Originally Posted by markkleb

I dont think you can find a "cheaper" dremel than this
http://www.harborfreight.com/cpi/cta...emnumber=94076
(I wouldnt build a house with it but it works fine for modding)

Please, nobody get this ^^ dremel wanna-be!!! For cutting metals, forget it!!! The second the wheel hits the metal, it stops. If you are designing cakes, it's perfect!

If you are going to go with harbor freight, spend the extra $10 & get This One. It's just a bit more heavy duty than the first one & has 4 speeds (although I really believe it's way slower than advertised).

PS. Sorry to threadjack here "LF", it just needs to be known about that Rotary Tool.. Good luck with your mod!

		Overclock.net - Overclocking.net > Case Mods & Cases > Case Mods - General Discussion
modding supplys.. where's the cheapest place?

02-21-08	#4 (permalink)
markkleb Case Modder Join Date: May 2006 Location: Reno, Nevada Posts: 369 Rep: 57 Unique Rep: 47 Hardware Reviews: 5 Trader Rating: 1	I dont think you can find a "cheaper" dremel than this http://www.harborfreight.com/cpi/cta...emnumber=94076 (I wouldnt build a house with it but it works fine for modding) mnpctech has a pretty good deal on molding http://www.mnpctech.com/UChannel.html

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)