Refresh

After you cut holes for cable management what tool (that fits in a drill) is used to smoothen out the circumference of the the hole?

dralb

I use a dremel. There are different types or wheels to use, but most of the burrs are on the face of the metal, so it can help to hit it at an angle.

__________________
Antec 1000 Case Mod Worklog

3358 Windsor 3800


"[Vietnam] only made billionaires out of millionaires. Today's war is making trillionaires out of billionaires. Now I call that progress." -Kurt Vonnegut

CD in response to whether folding is a waste:

RedFox911

I just used a metal file.
Good luck, i just cut my first CMH's last week

__________________

!GPu-z VALIDATION 8800gt oc'd!

......13601 3dmark 06......

The Vista Community

Refresh

I need one for a 3/4in hole, hopefully home depot has it.

Choggs396

You could just use rubber grommets. If the size with the grommets is too small, you could always cut a larger hole to begin with. You can do a search on Google, there are a lot of places that sell them. I think they provide a cleaner, more professional look.

__________________
FOR SALE: Radeon X850XT/PE

I did error10's Windows Challenge and Windows now runs me!

Je pense, donc je suis
- René Descartes

Overclock.net Professionalism Initiative

dralb

Any decent half round file would work. Just remember, file in one direction. You don't run it across the material in both directions, one way only.

__________________
Antec 1000 Case Mod Worklog

3358 Windsor 3800


"[Vietnam] only made billionaires out of millionaires. Today's war is making trillionaires out of billionaires. Now I call that progress." -Kurt Vonnegut

CD in response to whether folding is a waste:

Refresh

Some of my holes might be 2 3/4in holes next to each other, forming an irregular shape. My cosmos came with some U-Channel, but not enough.

gibsonnova74

hey refresh, depot does have it. i bought one for my wire management. you can widen and sand the holes with drill extensions(i dont know what they are called). they were like $5 or $7 apiece. i bought one that looked like a cave man club with teeth(to widen) and a sanding bit to smooth the rough edges.

__________________
FOLDING FOR OCN under chrisbgibson

I fold for the cause, do you?

Refresh

Thanks to everybody
+rep

dranom

you can use those round files. i think home depot sells it really cheap or ebay

__________________
Linksys Fan MOD w/ heatsinks

9800 GX2 HDMI Fix

690 Crew