radbirts

As some of you may recall, I posted a thread all most a month ago describing a fan mod I did, but didn't have pictures. Well, I've got pics now, but first, for those of you who didn't see my old thread, I'll go over what I did again.

I started off by takeing off the fan blades of this fan that I bought:
http://xoxide.com/vaspuvled80f1.html
I did this by peeling off the sticker, then there will be a little washer that pops right off and then just pull off the fan blades.

I then, spray painted the blades with this spray paint:
http://www.utilitysafeguard.com/s.nl...t.A/id.3514/.f
Note: It doesn't have to be the H20, but that's just what I had here.

The result was a much better looking fan. It turned out to be a purplish color on the fan blades, which was unexpected by me.

Another Note: The H20 spray paint, being water based is very runny, therefor needs about 4-5 coats... litterally. So I suggest just getting the regular Krylon Fusion, in that same color.

Attached Thumbnails

   

__________________
"And out of the corn, comes a small child."

"Wow, she's coming onto us faster than a 5Ghz processor!"
It's all fun and games until someone loses a REP point!!
"In 2000 Bill Gates was honored with the Mark Twain Prize for American Humor."

not2bad

Looks nice.