darkninja420

very nice man.. only thing.. your f'n crazy for not having any damn clamps on those tubes.. that rear rad tube looks like its about to come off

__________________

gamer50

I just got mine today, Cant wait till tonight to set it up!

Triplesec

Crap pics did not upload correctly.

__________________

Triplesec

Yay!! they took this time! OK.. Here is the fist coat of paint it is actually gloss red but the flash makes it look orange/pink. Will have more tomorrow after the paint is done.

__________________

rx7racer

Sweet, I like the red, was gonna paint my mb tray that but went with satin, I'll have to get my pics up.




And some more pics,

http://img36.picoodle.com/img/img36/...6m_b0c279b.jpg
http://img02.picoodle.com/img/img02/...7m_988c36c.jpg
http://img37.picoodle.com/img/img37/...8m_b9adeea.jpg
http://img37.picoodle.com/img/img37/...9m_e292b05.jpg

dech

thank
It was not that easy to leak , because my tube fit to my fitting really tight
and if I used the clamps it would be more delicate when I uninstalling it from my system.

lordikon

Ok, you can add me to the list now, here's the pic. 99% unmodded, I just removed the plastic honeycomb grates on the top.


Looks like I may need to paint my white DVD-RW drive now that I have a black case.



Great tower compared to my old cramped RaidMax. 120mm fans helped with noise so much, my old tower had 6 80mm's. Love the dust prevention and padding for the PSU. Only issue I had with the PSU at the bottom is the extra 4-pin power connector for the motherboard didn't reach from the bottom, around my sli cards to the top-left of my mobo so well. Oh, and because the HD slots are turned sideway I cannot get my IDE HD and IDE DVD-RW next to each other, and my mobo only has one IDE connector, so I cannot use both devices until I get a 5 1/4" adapter for the old IDE HD and move it up next to the DVD.

Anyway, great case so far.

EDIT: Ended up running 4-pin power connector behind the video cards. Moved IDE HD up to 5 1/4 bay and used the floppy drive adapter to mount it

__________________
Current Modern Warfare 2 petition count: http://sebastien.me/mw2/petition.png
Currently folding with:
2 8800GTS g92s -- 1 GTX 275 -- 1 8600GTS -- 1 e8400 -- 1 i7 950 (50%) -- 1 e6600

lordikon

That is a good thought, I may try that. Also, it may fit in the floppy adapter that sits at the bottom of the 5 1/4 bay, I don't have a floppy so that may work. Thanks guys.

__________________
Current Modern Warfare 2 petition count: http://sebastien.me/mw2/petition.png
Currently folding with:
2 8800GTS g92s -- 1 GTX 275 -- 1 8600GTS -- 1 e8400 -- 1 i7 950 (50%) -- 1 e6600

Triplesec

OK final painting is done. Mods to the top are done. A few touch ups will be needed after the tape and paper come off I am sure. Now just a couple of small mods for wiring and she is done.

It will be air cooled for now but plan on going to liquid soon.

__________________

xlastshotx

What do you guys think of this?


(Desert Tan Paint, Chrome strip changed to black, the mesh area will stay black)

__________________
Q9550 C1 - 4,531Mhz > Image > Orb