The "Official" Cooler Master 690 Club - Page 98 - Overclock.net

NickN · 05-13-08

ohh, so i've done it wrong? i thought i changed it to exhaust, hmm
thanks

Iconoclast · 05-13-08

Quote:

Originally Posted by smokinbonz

Alright fellas im looking for some assistance, ive been having some problems dunno if its case related or not but i did notice something so ill go over it all. My Pc seems too be ultra sensitive to esd like if i touch it and have it seems like even the slightest static it turns my monitor off. ive been doing some tracing and the grounds seem to be all good except for 1 ground. that is the case ground on the circuit board for the top usb ports and audio etc. Ive noticed there is no case ground path through the usb ports and usb plug. Granted if i used the headphone jacks and esata port there would be a ground path but i do not i only have the usb ports plugged in. Anyone think this may or may not be the problem ?? im probbaly just gonna solder a jumer wire in there, but im really looking to see why the hell its so damn sensitive.

Edit: Did the jumper still same issue, tried different outlets, same issue. It boils down to this if the usb board is plugged in the pc is iltra sensitive to esd even after mylittle worthless mod. So for now maybe forever im gonna leave the ports unplugged from the mobo and hope theres happy sailing. It kinda stinks i have to scrap them though it is a little more convinient. Still I am open to suggestions on what might be goin on with this. Thanks

Do you have your rig on a carpet? Is your entire room carpeted?

smokinbonz · 05-13-08

Quote:

Originally Posted by Iconoclast

Do you have your rig on a carpet? Is your entire room carpeted?

yes that is true although i keep the pc on a cardboard footprint because i dont want it to sink in and clog the intake for my psu . If you have some ideas for me and want to see where im at with this because i have had some success i started a thread a few days ago here Thanks man Check it out maybe you can help me. I also have a fabric seat which dont help !

tonschk · 05-13-08

I still dont understood your problem and have not idea , the only problem i can remember with the ports at the top on the roof of the CM690 is this post in a CM690 thread of the coolermaster forums , sorry i have any other idea

http://forum.coolermaster.com/viewto...sd=a&start=135

by iron_gr on Sun Dec 02, 2007 1:33 pm

Bought this case. It's nice, a little more noisy, I expected it more silent.

It has a production error! The ground cable of the IEEE 1394 above the I/O panel is not grounded! It is with the screw that holds the i/o panel in place. I took it from there and grounded myself straight on case.

If you can pass it to the guys that put it together, would be nice.iron_gr
LED Head

Posts: 4
Joined: Thu May 24, 2007 5:57 pm
Private message

xguntherc · 05-13-08

OK, So here it is, I've finally decided to change my thread and add some of my new pictures for everyone..

Here's my CM 690, I painted the inside midnight black.. Hope you all like it.. PM me if have any questions, wanna see more pics. or have some Good Suggestions for me.

http://img218.imageshack.us/img218/6749/img3067vg1.jpg

what will fit here?
http://img81.imageshack.us/img81/3138/img3071dv6.jpg

4GB of some Good Quality Ram, I'm a fan of G-Skill for now..

Here's the New Videocard Long Huh..

Close-up With GTX260 installed, 10 MP Camera makes it a good picture, you can see the dust.

OK, Here's The Final Product as of Now.. New Silverstone 110CFM Rear Fan, Tuniq Tower CPU Cooler, and my new GTX260. Card is doing much better than I thought.. Very Very comparable or better to the 4870.

Also, Newest Addition is a Second 22Inch Samsung LCD. now I have Dualies and love it. I have the Samsung 226BW, and the 2253BW. both great great looking, & 2ms response time panels are a plus.

---------------------------------
Newest edition. I added a Window to my system. I've wanted to for a while. and I think it looks really good.

This is the beginning. See some sparks a flying. It was quick and fun, don't forget your safety goggles.

Here is the new window MOD

Completely finished with a Re-seat of my cooler.

iandroo888 · 05-14-08

looks nice. should paint rear slot covers black too.

ive seen a fan be put on that heatsink area.. think evga has a fan on there. but some ppl say its noisy. maybe u can find a different solution or fanless is always good too..

management is pretty good. gj

oh u put the fan on there already hahaha. post picture of completed rig

*goes back to studying*

Kamui · 05-14-08

Love it xguntherc

What is the name of the cooler u are using for the NB? I was looking for something just like that for my build!

yellowtoblerone · 05-14-08

its the stock cooler that came with the evga 750i ftw board.

i have the same set up but i hate that fan

great cable management btw

cyborg939 · 05-14-08

How do you paint the inside black like that? How long does it take to dry? Could someone help me out?

Gear853 · 05-14-08

i am so getting this case... *is in love*

		Overclock.net - Overclocking.net > Case Mods & Cases > Computer Cases
The "Official" Cooler Master 690 Club

05-14-08	#977 (permalink)
Kamui New to Overclock.net Join Date: May 2008 Posts: 5 Rep: 0 Unique Rep: 0 Trader Rating: 0	Love it xguntherc What is the name of the cooler u are using for the NB? I was looking for something just like that for my build!

Currently Active Users Viewing This Thread: 5 (1 members and 4 guests)
scavenger