darkninja420

ok i have the famous CM690

my loop consist of res,2xrads,ddc pump, cpu block, gpu block

im trying to fit all this internally but im having lots of problems with space :/

loop parts:
mcp355 pump w/ petra's top
d-tek fuzion cpu
d-tek fuzion gfx or dd koosah(using currently until i upgrade gpu)
swiftech 220 quiet rad
black ice gtx extreme 120 rad
swiftech microres
14ft 1/2" masterkleer
24" anti-kink coils

helpers will receive +Rep
here is a few pics of what i have installed currently..





**Update**
New Loop Shown

__________________

wire

You could take out the HD Cage and put the HD in the 3.5 bay. Then you'll have more room if need be. This is for the Lian Li.

__________________

noobdown

why cant you fit it in the cm690? whats ristricting you?

__________________

darkninja420

cant find a placement for the microres and the ddc pump..

__________________

losttsol

Here is a picture of my CM690 while I was bleeding air when I installed the CPU/GPU water loop. Radiator mounted on the back with the pump on the bottom right. You could even put one radiator on the back and one on the top, but it might get a little complicated. There is actually room for another pump below the hard drive in the far lower right if you wanted, but you might have to open up the drive bay a little for the hoses.

Edit: If I ever get the time or motivation, I'm going to drill the tube holes in the back at the top and reverse the radiator 180 degrees. It will make for less hose and better flow and use of the radiator.

__________________

The OCN Flame in Action!

There are only two industries that refer to their customers as users. (Edward Tufte)

RonindeBeatrice

I saw one A05B where they removed the HD bays and stuck a 120 rad there, you could do that if you don't want to sling it off the back. A 240 rad will fit in the floor fine. That's how I'd do it. I'd move the harddrive up to the optical bay and mount it with a scythe silencer.

You could tuck the microres on the blind side of the PSU and hang the pump from the bottom of the optical bays.

OR! You could get a Apogee drive which is on sale for $75 at petras and drastically cut down the amount of stuff you'd have to worry about.

__________________

darkninja420

my only problem with that is mine has to be all internal.. i dont have room on my desk for a rad to hang off the back :/ or else the case will fall off my desk lol


hmm that actually sounds good.. ill see if the rad actually fits there.. this is a huge 120mm rad..

__________________

noobdown

an idea for ya

__________________

darkninja420

that is a good idea.. although the gtx rad is just to damn fat to fit there >< i tried and tried if it did i would be a happy man

__________________

noobdown

i have the MCR220 up there


bix
DIMENSIONS
Width 133 mm
Height 397 mm
Thickness 54 mm

mcr 220
Width 5.0" 128mm
Height 11.2" 284mm
Thickness 1.3" 34mm

__________________