Clarkseth

Thank you i need oly 1 week to complete all work

Thank you. As for the Intel heatsink ... I can not remove it until 'the waterstation does not work (and can then mount the wb Ybris gold ACS) unfortunately my shop a friend is making me wait one month 5 fans Uv Reactive Red thermaltake of: (

Clarkseth

Here I am with another couple of changes, I have still more to do ... and others made that I can not show yet because ... 'are all connected but the last components are finally coming!
Here are the latest changes in my CM 690:
Replacing the LED BLU ultra power:
The blue LED power on, ultra, I do not know you, but I gave much discomfort, I illuminated the whole room so I opted for a replacement:

I applied a yellow that is even more 'beautiful to see.
Door optical drives hidden:
I applied the velcro on the door and bundled meshx:


and the final result is:

Just apply a little pressure on the bottom to open the reader.
Subsequently, with regard to the cap higher, I decided to cut strips of plastic dust, and I added a rheobus:


Seghetti for good ... and pave:

Here I am at work for the drilling of the panel (because states' tab silicon rheobus must stand on buttons):

photos of the front complete:


There are other changes under way, one of which includes an electronic silicon that is found in America ... and I'm desperately looking for even here in Italy, otherwise I will go myself to create the circuit but will Vabe ...

__________________

Danylu

OMG This is so subscribed

Well done.

__________________

Clarkseth

Thank you

__________________

YOSHIBA

looks great

__________________
Riki-Tiki-Rocketfish Log

XBOX 360 mod

Clarkseth

Thank you very much

__________________

Clarkseth

First I have taken apart the computer to pieces () to enlarge some holes, and paint everything in black:

here are the holes facts:
Topcap expanded to rheobus:

Forum for the passage of wires on the right side of the case extended:

... and now after hours of assembly, are ready to show the order:

and CAOS:

However, with great strength, and other terminals are able to close it.
Here's a picture of the side:


Although meshx is processed, the logo is still missing and is therefore incomplete, I do not like at all, and remove.Photo of leds plugin:


Pictures in rheobus function:

and a picture of frontal low enlightened me with ultraled:

Here's a picture overall:

Here's the next thing on which work is connected to the cap and above those many holes facts:

__________________