The *OFFICIAL* CoolerMaster HAF 932/922 Owners Club - Page 143 - Overclock.net

Dantesinferno · 07-07-09

Quote:

Originally Posted by cs_maan

220 to rough up the surface for the primer, then 1000 to get out the rough spots.

Thanks cs_maan! +rep

cs_maan · 07-07-09

No prob

good luck with your painting. And remember children...POST PICS

.

robbyriverside · 07-07-09

Just bought my first build with HAF 932.

Keep hearing folks on OC saying they are fanatics about wire management.
Some have said the HAF 932 is really good for that.

Anyone willing to provide some advice about doing it right?
Help me to do it right the first time.

reedo · 07-07-09

Quote:

Originally Posted by cs_maan

You guys think, if I replace the stock 140mm fan in the back, with a Xigmatek 140mm it'll make any improvements in airflow, or will it just look nice?

the stock fans airflow is not the best imo

Touge180SX · 07-08-09

Quote:

Originally Posted by robbyriverside

Just bought my first build with HAF 932.

Keep hearing folks on OC saying they are fanatics about wire management.
Some have said the HAF 932 is really good for that.

Anyone willing to provide some advice about doing it right?
Help me to do it right the first time.

Welcome to the club!

As for the cable management, take a look at spacegoast's cable management guide on the first page!

silverwolf741 · 07-08-09

I'm not really sure where to post this but this seems as good a place as any, seeing as this is meant to possibly help somebody with the same problem I had. I built my new computer the other day with a HAF 932 and thought I was gonna lose my mind when the computer starting randomly restarting itself. Everything worked fine as I was adding software and drivers for components and such, but as soon as I moved it to my desk and began adding my usual programs, it started randomly restarting. I thought I messed up a setting in the bios but it would even restart before I could change the bios settings. Finally I pulled the wires from the case's reset button off the mobo and the problem disappeared. I can only assume I got a case with a faulty reset button. It doesn't bother me and it's certainly not worth returning the case over. I couldn't find anyone with a similar problem on this site so I thought I would share my experience.

Touge180SX · 07-08-09

Quote:

Originally Posted by silverwolf741

I'm not really sure where to post this but this seems as good a place as any, seeing as this is meant to possibly help somebody with the same problem I had. I built my new computer the other day with a HAF 932 and thought I was gonna lose my mind when the computer starting randomly restarting itself. Everything worked fine as I was adding software and drivers for components and such, but as soon as I moved it to my desk and began adding my usual programs, it started randomly restarting. I thought I messed up a setting in the bios but it would even restart before I could change the bios settings. Finally I pulled the wires from the case's reset button off the mobo and the problem disappeared. I can only assume I got a case with a faulty reset button. It doesn't bother me and it's certainly not worth returning the case over. I couldn't find anyone with a similar problem on this site so I thought I would share my experience.

That sucks but thanks so much for the heads-up for everyone! +rep!

MeeksMan13 · 07-08-09

Quote:

Originally Posted by Dantesinferno

I just bought some rustoleum flat black paint and primer yesterday. 3 cans each. I didn't buy sand paper yet. Whats the most efficient sandpaper to use? 220, 400, 800, then 1000? Should that be enough. The paint job doesn't have to be amazing because im not de-riveting my whole case.

I sanded with 80 grit, then 220

mlprrj · 07-08-09

other people were experiencing problems with hdd led not lighting up and or not blinking with activity. It seems somthing was faulty with front panel top. I read after these people brought up the problem to coolermaster they were receiving the whole front panel top as a replacement for whatever the problem was. anyways thought id mention that, could be worth a shot.

cs_maan · 07-08-09

It could be that people just flip the actual plug that goes into the motherboard, I've done that multiple times lol and thought something was faulty until I figured out the plug was upside down. (Meaning the ground and the hot wire were flipped)

View Poll Results: Should this thread be for both HAF 932 and HAF 922 Owners? They are brothers!
Yes	46	56.79%
No	35	43.21%
Voters: 81. You may not vote on this poll

		Overclock.net - Overclocking.net > Case Mods & Cases > Computer Cases
*The OFFICIAL* CoolerMaster HAF 932/922 Owners Club**

Currently Active Users Viewing This Thread: 8 (5 members and 3 guests)
H-508, Mokolodi1, Paraleyes, ronopp007, triggs75