Nhb93

Woah, awesome paint job man. How did you pull off the HAF in green?

__________________

We Are Gr33n Machine

Dynamic

I had to work around the letters with masking tape after painting the detail on the inside, the next stage the same process and paint the outside ..

Mokolodi1

Hey, look at this- this is why they put the random fill port hole at the top of the case!!!

http://www.frozencpu.com/products/21...ack.html#blank

I am an air cooler, so I wont need this, but some others might find it useful...

HAFenvy

I'm using that Fill Port and guess what... the barb comes off and is a standard G1/4 thread so.... I put a compression fitting on it . I actually have two of these, the other one is on the drain line coming off the bottom of my reservoir. That way, I hang the tube out the side of the case. Once the reservoir is empty and any other fluid that comes out first run, I thread in my barb attached to a long chunk of hose. I put the other end in a containier and can easily lift, rotate and work all the other coolant out of the case without spilling. Handy

__________________

MeeksMan13

that's quite an impressive case man, good job

__________________

Dynamic

is not finished, expect to see XD

harrison

my new haf

Attached Thumbnails

         

harrison

moor pic this is my first compleat buld

Attached Thumbnails

         

GnrlKll

I have one of those. I had originally planned to use it in the fillport location but after putting it there i realized what a tight squeeze it was for my other components. So I slapped it in the back as a drain port.

guscol

thank you men this case need a lot of mods