Dantesinferno

whoa that is bright! anyhow did you prime your case before you painted it? or did you just paint directly on to it?

__________________

jmcmtank

Rubbed it down with 80 grit sandpaper then used a standard grey metal primer.

__________________

Robilar

This is the one I used.

http://www.canadacomputers.com/index...591&cid=FN.505

Its blue LED and 72 CFM (much higher rated than the stock fan).

Its also the only blue 140mm LED fan I could find... (turned out to be a good one though).

Attached Thumbnails

   

hale1278

My name is Hale 21 yrs old. Im doing my project on HAR 932 and I'll call it HAF 932 Revision and will done in mid June. Pictures will post later PEACE

FlyingColours

Tell me what you think?

Hi my names Ben im from Australia and this is my HAF 932.

I completed building my HAF 932 in early January this year i rushed the paint job as i was hurrying to finish it before a competition i was competing in.

Okay so here is a list of whats in my PC

HARDWARE / ACCESSORIES

-Hard drive: HDD WD CAVIAR BLACK 1.0TB 7200/32MB/SATA2 X3

-PSU: PSU CORSAIR 1000W HX-1000 MODULAR

-RAM: MEM CORSAIR TWIN3XDHX 4GB KIT PC10600 1333M# X2

-DRIVE: OPT PIONEER BDC-S02BK BLU-RAY COMBO

-MOBO: MBRD XFX NFORCE 790i ULTRA SLI MOTHERBOARD

-GPU: Nvidia 8400gs at the time i first built it but now ive got some ****ty asus EAH4650.at the time nvidia had just released the GTX 295 and im waiting for XFX to release an overclocked spec edition of the 295.

-CPU: INTEL CORE 2 Q9550 2.83GHz

-HDTV: COMPRO DVB-E850F 2xAV/DV-TV/AV-CAP PCIe

-LIGHTING: Dual 30cm Cold Cathode Kit UV

-CABLE MANAGEMENT: AC Ryan Flexi Sleeve Kit UV Blue

WATER COOLING / FANS NOT STOCK WITH CASE

-Pump/reservoir: CoolerMaster Aquagate MAX

-CPU:Enzotech LUNA Full Copper CPU Liquid Cooling Block

-top mosfet:Bitspower Black Freezer N79AP2 790i MOSFET Type 2 Liquid Cooling Block

-left mosfet:Bitspower Black Freezer N79AP1 790i MOSFET Type 1 Liquid Cooling Block

-Northbridge/southbridge:Bitspower Black Freezer N790NS 790i nVidia North / Southbridge Combo Liquid Cooling Block

-Fittings: black freezer compression fittings/ right angles

FANS: AeroCool 120mm Turbine 2000 Fan - BLACK X2

-Paint: Clearneon UV Reactive Clear Coat Paint
Black MATT something something.

Tell me what you think?

Attached Thumbnails

         

MeeksMan13

I think It looks great man. good job! the paint on the inside looks great. what're the blue things on the pci slots?

__________________

dinik

DINIK´s Filter System
Instructions for a filter in the front fan!

P.S.: this way you can create filter not only for the front...i will show you more photos of what i have done with my technique

you go and buy a mosquito net in shops for 1.50€.... cut a piece of it... and fold it 8x


you have to make it harder... i have set the Temp. on max.












tadaaaa!!! you have a filter for 1,50€...

dinik

+add me as a haf user

tis is my Cooler Master HAF RC-932...und what i have done with it.
AMD X4 940 BE

Lyric

now that is kickass, dink. I'll have to try that one when I actually get a working front fan. I got my CM HAF 932 from Fry's and the front fan hits the shroud so I had to put in a eRMA Request through cm's website, didn't feel like taking my whole computer apart just for a fan to take it back to fry's.

Anyway, here is my cm haf 932, whole system was built approximately 2 weeks ago. The 2nd pic is with the first cooler setup I was trying, but the temps were too high for 4GHz (80*C) running 100% load under Linx, so I replaced it with a Prolimatech Megahalem and the temps are a whole lot better. 69*C max under 100% load in linx.

spacegoast

Thats a great idea for a filter dinik. I will have to try that one.

__________________