The Silverstone Case Owners Club - Page 25 - Overclock.net

felix.vollrath · 06-03-09

So I'm planning on buying the SILVERSTONE TJ07 with side window. I won't run water cooling though. Is it still a good case to cool my hot running GTX 285s?

rocklobsta1109 · 06-12-09

TJ07 isn't the best for air cooling but it shouldn't be too bad I think you would be ok with that setup

boredgunner · 06-12-09

The only intake fans are the rear 92mm, and since the video cards exhaust heat out of the rear and it has negative air pressure (so air is passively drawn in), the GPUs heat can be drawn back into the case. If modding/water cooling aren't your thing, skip the TJ07. Air flow is horrible.

kimosabi · 06-13-09

Quote:

Originally Posted by felix.vollrath

So I'm planning on buying the SILVERSTONE TJ07 with side window. I won't run water cooling though. Is it still a good case to cool my hot running GTX 285s?

Nope. As boredgunner stated. What you can do is getting a kama-bay or something at the front for intake and flip the rear fans. But the case is not really a good aircooler. Not out of the box.

Al plants Corn · 06-13-09

Finally got the build finished last night. Here's some updated shots from before.

ShadowFox19 · 06-13-09

Quote:

Originally Posted by Al plants Corn

Finally got the build finished last night. Here's some updated shots from before.

http://i33.photobucket.com/albums/d81/261/142.jpg
http://i33.photobucket.com/albums/d81/261/133.jpg
http://i33.photobucket.com/albums/d81/261/144.jpg

Looks good, man!

ShadowFox19 · 06-15-09

I was replacing my 120mm x 25mm fan (with a 120x38) today, and finally remembered to take a couple pics...excuse me, it's a work in progress.

Also, excuse the pictures, I didn't take my time to compose the pictures very well.

I plan on putting a 4 bay SSD cage where there's an open 5.25" bay in the first picture.

Al plants Corn · 06-16-09

Shadow, I figured out if you remove the rubber channel around the top most CM hole you can fit that 8pin cpu power cable through there. At least I could anyways.

I screwed up when I was routing my cables. Took off both fans like you said but routed cables in the slot/space between the back of the HDDs and where the fan mounts. This resulted in that fan not being able to mount. Will probably have to redo it sometime.

**lemans81** · 06-17-09

Silverstone is seriously pushing my buttons, I tried to email them from my yahoo and gmail accounts for months, then I used my work one and all of a sudden I get an answer. They redirect me to their US parts rep....who speaks engrish.

Here is how it progresses via email:

Quote:

Originally Posted by silverstone

Hi Jeremy,

this part is will be $20 plus shipping

Thank You and let me know

Quote:

Originally Posted by me

That will be fine, but does that include everything in the top panel, just like it came from the factory?

How much will shipping be to me also?

Quote:

Originally Posted by silverstone

Hi Jeremy,

can you tell me what you have and what you need because I check my stock and I do have

power switch
reset switch
LEDS
part of the top cover

WAIT what? I thought it was $20....and you don't know what I need?

Quote:

Originally Posted by me

I need the power switch, reset, the LED's under the cover, the usb's/firewire, and the whole top panel that holds those pieces. Its like a oval shaped piece that holds all of those and it clips into the case, its all made of plastic I believe.

Quote:

Originally Posted by silverstone

Ok I have most of the parts there is one that I'm out of stock and will order it should get here with in three to four weeks
se picture that is what you need and they have a mark of what I have and what I'm missing

thank you

The picture showed it missing one of the critical pieces I need

Quote:

Originally Posted by me

Yes that is what I need. It will come with all the LED's and power switch and reset switch as well correct?

Quote:

Originally Posted by silverstone

yes it comes with usb,audio,1394 , reset ,power and leds like I said I only have those three parts with the check mark I can sell you those three for $20 plus shipping , if you want them please reply with your shipping address and call me with your credit card info

thank You

Quote:

Originally Posted by me

But I need all the pieces.

Quote:

Originally Posted by silversone

I see , I out on some parts but I order them last Friday from Taiwan and they usually take 4weeks to get here

Thank You

Anyways I thanked him and told him to get back with me as soon as he has the stuff. I have been trying to get these parts since March....getting to the point I just want to move on and mod a different case now.

ShadowFox19 · 06-17-09

Quote:

Originally Posted by lemans81

Silverstone is seriously pushing my buttons, I tried to email them from my yahoo and gmail accounts for months, then I used my work one and all of a sudden I get an answer. They redirect me to their US parts rep....who speaks engrish.

Here is how it progresses via email:

WAIT what? I thought it was $20....and you don't know what I need?

The picture showed it missing one of the critical pieces I need

Anyways I thanked him and told him to get back with me as soon as he has the stuff. I have been trying to get these parts since March....getting to the point I just want to move on and mod a different case now.

I know what you're talking about. I contacted customer/technical support in the US about whether or not a Silverstone 5.25" bay HDD rack would work in my Raven, and the their response was the only Silverstone accessories that would work with my case were the Raven edition mouse and the Raven edition external 2.5" portable HDD enclosure...I didn't even waste my time replying. I was dumbfounded in how little they actually know their products. That's why I bought a Lian Li HDD rack to mount into my 5.25" bay. And what do you know, it worked just fine!

		Overclock.net - Overclocking.net > Case Mods & Cases > Computer Cases
The Silverstone Case Owners Club

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)