The Official CM Storm Scout Club. - Page 251 - Overclock.net

photonmoo · 2 Weeks Ago

Quote:

Originally Posted by Pandemahaos

Nice...Looks styling

.. couple questions.. is that window tinted red or is that just the lights reflecting? Did you get an extension plug for the 24pin MB power(am I seeing it right)? Is taking out the plastic rivets really as easy as the pics on the 1st pg and reusable? I just bought some plastic and going to attempt a window mod tomorrow. Thanks

It's a fluro uv red perspex with a red cathode behind it, as well as a uv led spectrum light.

I got a 24pin extension cable, but I extended that as well...it was too short and sleeved it with black sleeving and red heatshrink.

The plastic rivets are easy as to take out, just apply a bit of pressure to the back with a screwdriver and they slide/pop out easily...

You shouldn't come into any troubles with doing the window...it's easy as.

Quote:

Originally Posted by raisethe3

Hey Photonmoo- Did you get your CPU back yet? I remember recalling you had the Phenom II chip. What happened to it?

I ended up sticking all the new goodies into my HAF as it was going to be too much of a tight squeeze and cramped in the Scout. I still have the M3N-HT Deluxe mobo, another 8GB Ram...so I might go with that in the Scout. (later down the track)

Quote:

Originally Posted by Treacherous Intellect

hey where u getting those cut at???

There is dude in Brisbane, has his own little business doing mods and stuff on the side, I sent him the remaining piece of perspex I had and what I wanted done and he's going to the do the rest

photonmoo · 2 Weeks Ago

Quote:

Originally Posted by Enigma8750

You know that black sound proofing and water proofing that they put under the door panels in the cars.. Thats what you need man.. About a 600x600 slice. I suggest the back door of the wifes car on the passenger side. LOL BTW I love the Key start.

Hehe, you're silly. tisk tisk

imh073p · 2 Weeks Ago

Hey guys, just finished putting in some parts that came in the mail. Next step for me is some vinyl work, im thinking about covering the entire case in H.R. Giger artwork. I know the top handle section is going to be a nightmare, if you have ever worked with vinyl you know what i mean. Anyways, heres what i did,

Scythe kama bay, had to do some drilling to get these spiffy rubber fan screws to work with it. I was going to get another fan controller but i really liked the scythe kazemaster ace. I went with 4 blue R4's.

UV red rubber fan screws with mesh dust filters. I had planned on getting the magnetic ones but they were out of stock at the time i ordered.

2X 4" red cathodes with sound module. really wanted a better location for the lights but my case is getting kinda crammed. Thanks to performance pcs for sleeving all my junkies and saving me oodles of time

Im building another scout with an i5 for my mom so ill be posting that one too! Cheers.

photonmoo · 2 Weeks Ago

Very very nice imh073p, the blue and red looks funky

You've done well, rep up!

Amstelager · 2 Weeks Ago

Great work imh073p, that looks so clean and mean!

jorre · 2 Weeks Ago

hey all...
i just want to little update y inside of cm storm scout..

MlbrottarN · 2 Weeks Ago

Quote:

Originally Posted by Enigma8750

MLBrottarN. You need to build a box under the scout and set all of your Water cooling equipment in it. Run your air flow from East to west and then mount your pump at the top of the case if possible
Enigma

Why is this you say? I've been doin the measuring (Math is my greaterst subject) And it will fit, and aslong as the highest part of the fillport is above the CPU and it is before the Pump it will work, simple Physics (one of my greatest subjects)
And i can't realy say that i can fit a big Rad-box anywhere near my desk it's pretty cramped, and placing the Scout on top of the Radbox Will just cause it too gain height and destroying it's looks, also, the greater airpresure gerated inside the case will be greater reducing dust :O:O

Quote:

Originally Posted by jorre

hey all...
i just want to little update y inside of cm storm scout..

Omg! That cooler for the 8600gt is supah overkill! xD
Can't realy see why you need it, mine keept cool with stock cooling in my old badly vented dell case.

dkev · 2 Weeks Ago

Quote:

Originally Posted by Enigma8750

Guy's dkev heard I was gunnin for him so he got The No#3 Clock on the 550 overclock Club.

Great Job dkev REP UP

CPU Clock 4118
HT Multiplier 200 x 20.5
Voltage on the Dually1.48v
Timing on the memory 802
HT timing 2009

MegaBoard Gigabyte GA-MA785GM-US2H 785GX
Cooling with a Xigmatech Dark Knight

BTW I am at 3819
19x201
HT 1809
memory at 1072
Ran 3D Mark 06 stable at 11162 with an 8800 GT 384 mb.

I think Santy Clause might bring me some water cooling goodness and 1066 Dominators. It just sucks that I can't go dual rads without serious modifications.

Enigma8750 · 2 Weeks Ago

Quote:

Originally Posted by imh073p

Hey guys, just finished putting in some parts that came in the mail. Next step for me is some vinyl work, im thinking about covering the entire case in H.R. Giger artwork. I know the top handle section is going to be a nightmare, if you have ever worked with vinyl you know what i mean. Anyways, heres what i did,

Scythe kama bay, had to do some drilling to get these spiffy rubber fan screws to work with it. I was going to get another fan controller but i really liked the scythe kazemaster ace. I went with 4 blue R4's.

UV red rubber fan screws with mesh dust filters. I had planned on getting the magnetic ones but they were out of stock at the time i ordered.

2X 4" red cathodes with sound module. really wanted a better location for the lights but my case is getting kinda crammed. Thanks to performance pcs for sleeving all my junkies and saving me oodles of time

Im building another scout with an i5 for my mom so ill be posting that one too! Cheers.

Thou Shalt not Covet another man Computer Hardware. Im not preaching. I'm talking to myself. Damn.

You know I almost bought the sythe controller. but I was afraid that it would be too blue and my reobus glows like a spot light.. LOL. My lian li info center is nice if I mounted it in my keyboard.
I love the way you added the extra 120 on the top and then added to the two 4 inch Red CC on the side to keep the feel of the orginal design. Great Mod. Great Mod.

This is my picture for Build of the week. Congrats and great job.

Enigma8750 · 2 Weeks Ago

Quote:

Originally Posted by imh073p

Hey guys, just finished putting in some parts that came in the mail. Next step for me is some vinyl work, im thinking about covering the entire case in H.R. Giger artwork. I know the top handle section is going to be a nightmare, if you have ever worked with vinyl you know what i mean. Anyways, heres what i did,

Scythe kama bay, had to do some drilling to get these spiffy rubber fan screws to work with it. I was going to get another fan controller but i really liked the scythe kazemaster ace. I went with 4 blue R4's.

UV red rubber fan screws with mesh dust filters. I had planned on getting the magnetic ones but they were out of stock at the time i ordered.

2X 4" red cathodes with sound module. really wanted a better location for the lights but my case is getting kinda crammed. Thanks to performance pcs for sleeving all my junkies and saving me oodles of time

Im building another scout with an i5 for my mom so ill be posting that one too! Cheers.

Thou Shalt not Covet another man Computer Hardware. Im not preaching. I'm talking to myself. Damn.

I put your picture on page one it looks greaaaaat.

Thanks all of you for your interest and teamwork in this Thread. Without you it would be nothing.

		Overclock.net - Overclocking.net > Case Mods & Cases > Computer Cases
The Official CM Storm Scout Club.

Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
A30N