thehighlander123

so i just received a beautiful rocketfish and i cant wait to chop her up

things to be done

1. Cut holes/find mounting options for 2 triple rads and one 120mm rad(top and bottom maybe back)
2. Add antec triple hdd bay to front
3. Add fan controller
4. Find places for pumps and reservoirs

any and all suggestions will help

i have no idea how to fit it all

__________________
There can be only one! help me find a case (less than 150 shipped) http://www.overclock.net/wanted/5291...ml#post6532218
Dual Loop:
custom pvc res=>DDC3.2w/xspc acrylic top=>DDC 3.2 w/xspc acrylic top=>Black Ice Extreme GTX 360(3xUK 3000's pulling)=>mcr 120=>Apogee GT (bowed)=>res

DDC Ultra w/xspc res-top=>RX360(3x pana Ultras pulling)=>enzotech nb block=>Dtek GFX 2=>res-top

xToaDx

How are you planning on having a triple rad in the bottom? Are you not planning on using a power supply...?

__________________

thehighlander123

i need to figure it out

__________________
There can be only one! help me find a case (less than 150 shipped) http://www.overclock.net/wanted/5291...ml#post6532218
Dual Loop:
custom pvc res=>DDC3.2w/xspc acrylic top=>DDC 3.2 w/xspc acrylic top=>Black Ice Extreme GTX 360(3xUK 3000's pulling)=>mcr 120=>Apogee GT (bowed)=>res

DDC Ultra w/xspc res-top=>RX360(3x pana Ultras pulling)=>enzotech nb block=>Dtek GFX 2=>res-top

KamuiRSX

How much did you pay for your new rocketfish?

__________________

"I'm not going there to die. I'm going to see if I'm really alive."

thehighlander123

so has anyone done triple in the bottom?

__________________
There can be only one! help me find a case (less than 150 shipped) http://www.overclock.net/wanted/5291...ml#post6532218
Dual Loop:
custom pvc res=>DDC3.2w/xspc acrylic top=>DDC 3.2 w/xspc acrylic top=>Black Ice Extreme GTX 360(3xUK 3000's pulling)=>mcr 120=>Apogee GT (bowed)=>res

DDC Ultra w/xspc res-top=>RX360(3x pana Ultras pulling)=>enzotech nb block=>Dtek GFX 2=>res-top

xToaDx

I had a double in the bottom, triple in the top, I really don't think that you'll fit the triple in the bottom.

__________________

thehighlander123

im deciding against the triple on the bottom, might do it hanging off the back. maybe with a stipped 38mm or a rad box

__________________
There can be only one! help me find a case (less than 150 shipped) http://www.overclock.net/wanted/5291...ml#post6532218
Dual Loop:
custom pvc res=>DDC3.2w/xspc acrylic top=>DDC 3.2 w/xspc acrylic top=>Black Ice Extreme GTX 360(3xUK 3000's pulling)=>mcr 120=>Apogee GT (bowed)=>res

DDC Ultra w/xspc res-top=>RX360(3x pana Ultras pulling)=>enzotech nb block=>Dtek GFX 2=>res-top

G|F.E.A.D|Killa

when mounting the top rad, make sure you measure VERY well, not much room from side to side

__________________



I heard Ford is coming out with heated bumpers in 2010 so your hands don not get cold while pushing it.