CS:S Mouse Optimization Guide - Page 4 - Overclock.net

HatesFury · 01-14-08

I have some questions\comments on this thread.

1) i see the stress on removing mouse drivers. My question is, would you really truly reccomend this for my G5. The reason i ask is that the G5, and it's software, and purely tweaked for gamers, and i don't see any of the negatives you've highlighted on this thread.

2) the setpoint software (g5 software) allows you to disable mouse acceleration, and i believe it works. When i was playing 2142 competitevly i was the starting walker and did quite a bit of practice. I had a 180 down pat, and never saw any "over or under rotation" as you've described. If not i'll go hunt down and kill those 2 registery files you've talked about.

3) m_filter 0 sounds really good, will be doing that first thing when i get home.

I (obviously) game with a G5. My current settings would be: DPI 400-800-1200-1600-2000. I play CSS normally at 1600 DPI with ingame sensitivity set to 1.9 (sometimes i bump to 2.0 if i feel twitchy

). I use my on-the-fly to jump to 2000 DPI when sniping so that my scope speed stays scaled to my unscoped speed and feels more natural. I am running the G5 at 1000mhz USB uplink speed (i believe the setpoint software lets you do this just to the port your mouse is using, so you're not overclocking all your ports, and running into potential problems). I think i'll add the "no accel" codes to my source .exe to ensure i'm not getting any acceleration, but i would like to know if turning this off in setpoint does actually kill it or not?? Windows mouse sensitivity is set to default (1.0) so i shouldn't have any jump

.

Think i've got a pretty good setup?

HatesFury · 01-14-08

Quote:

Originally Posted by Burnhard

This information is superb, but also I find it extremely irritating as I cannot do several of the things you suggest.

I have the Logitech G9

Max DPI 3200
Max Polling Rate 1000Hz

Now, to adjust any of these things you use the software, but the software does not need to be loaded as the mouse has onboard memory to basically store your settings for plug and play functionality, I could take this to any PC and have whatever settings I set inthe drivers and saved to the mouse.

Here is the problem, u advise to use MAX DPI - 3200.

If I set windows mouse properties to default 6 as you state, in game sensitivity to the lowest, 1, its far far too sensitive in game, I have to use 2000 DPI to use these settings, and I switch to 600 DPI for desktop use, or my cursor just flys all over the place on 2000 DPI and windows sensitivity of 6.

in the drivers for the mouse, I have it set in the middle, 5, both this AND windows seem to have an effect on the mouse, I do not understand any of it.

there is also something in the G9 drivers that says this.

"Use OS native drivers for pointer speed and acceleration"

I can put a tick by this, or untick it, seems to do nothing either way.

m_pitch will not change form 0.022

m_yaw will change to whatever I want, so for a while now I have been using m_yaw 0.0165 and without knowing it m_pitch had stayed at 0.022 (no wonder I have had inconsistent aiming)

this is for CS 1.6 by the way.

so overall I am really unsure of, anything! despite the phenominal detail you have gone into, it is just not specific enough to help me with regards to my mouse and setup etc.

very frustrating not being able to put to use such excellent work.

Burn you should be able to set the sensitivity in source to less than 1. "sensitivity 0.5" etc, from console should work, and let you tweak a bit further. You do not have to use whole numbers for you sensitivity. i use 1.9 at 2000 DPI.

**gonX** · 01-14-08

Quote:

Originally Posted by HatesFury

Burn you should be able to set the sensitivity in source to less than 1. "sensitivity 0.5" etc, from console should work, and let you tweak a bit further. You do not have to use whole numbers for you sensitivity. i use 1.9 at 2000 DPI.

He's playing 1.6.

I have the same issue with 1.6 - I just turn down my DPI low, but it gets countered on my mouse, because somehow I can't move it as fast on 900DPI as I can with 1800DPI (Razer Deathadder)

Instead I'm using 1 sens on 900DPI... perhaps even turning it down to 450 and tweaking the sens a bit up from 1. That's the only thing I hate about the HL engine - it can't be put below 1 sensitivity

If anyone is interested - I'm using 0.29 in CS:S at 1800DPI

HatesFury · 01-14-08

Quote:

Originally Posted by gonX

If anyone is interested - I'm using 0.29 in CS:S at 1800DPI

that's so.... slowz...... 1.9 at 1600 vs 0.29 at 1800...... i'd die if i tried to play like that lawlz.

resj · 01-19-08

all you have to do is copy and paste in the game launcher (steam launcher & icon comments) exactly these commands:

-noforcemspd -noforcemaccel -noforcemparms

i believe they work in every other game as well, no need to dl things...

Leopardi · 02-22-08

Quote:

Originally Posted by gonX

He's playing 1.6.

I have the same issue with 1.6 - I just turn down my DPI low, but it gets countered on my mouse, because somehow I can't move it as fast on 900DPI as I can with 1800DPI (Razer Deathadder)

Instead I'm using 1 sens on 900DPI... perhaps even turning it down to 450 and tweaking the sens a bit up from 1. That's the only thing I hate about the HL engine - it can't be put below 1 sensitivity

If anyone is interested - I'm using 0.29 in CS:S at 1800DPI

What.... how is it possible that you have below 1 sens? I can't set it below 1! How do you do that?

HatesFury · 02-22-08

Quote:

Originally Posted by Leopardi

What.... how is it possible that you have below 1 sens? I can't set it below 1! How do you do that?

if youre playing Source, you do it from the console (~) mousesensitivity .5 etc.

BTK · 02-22-08

Quote:

Originally Posted by Antigen

This is a quote of a guide that was posted here. It is entirely mine and was originally posted at: http://forums.caleague.com/showthread.php?t=96767

Enjoy and in the future please, never copy someone else's hard work.

or just aim and click at the other team?

XFreeRollerX · 02-22-08

And ive done most of these to my mouse

mrtn400 · 02-22-08

Nice job. +Rep

		Overclock.net - Overclocking.net > Components > Computer Peripherals
CS:S Mouse Optimization Guide

01-19-08	#35 (permalink)
resj WaterCooler Join Date: Nov 2007 Location: tn Posts: 419 Rep: 14 Unique Rep: 13 Trader Rating: 0	all you have to do is copy and paste in the game launcher (steam launcher & icon comments) exactly these commands: -noforcemspd -noforcemaccel -noforcemparms i believe they work in every other game as well, no need to dl things...

Currently Active Users Viewing This Thread: 3 (0 members and 3 guests)