|
|
|
 |
Overclock.net - Overclocking.net > Hardware Vendors > CyberDruidPC | |
Client Build Log for Antesignani's External Cooler
|
||
 |
|
|
LinkBack | Thread Tools |
12-06-07
|
#1 (permalink) | ||||||||||||||
|
Scarring Your Psyche
 
|
Client Build Log for Antesignani's External Cooler
Yep it's time to build an Uber Kooler for Antesignani. I doff my pointy hat to the man for ponying up some serious coin to build the smallest most powerful external cooler anyone here has ever seen or will likely see
 Dual PA160 Rads, 265CFM fan, MCP655 all in a 12" cube...yep this is going to be OBSCENE. Stay tuned 
__________________
Quote:
|
||||||||||||||
|
|
|
12-06-07
|
#2 (permalink) | ||||||||||||||
|
Scarring Your Psyche
|
Design and Fabrication
 Thermochill PA160 Radiators.  Swiftech MCP655 Pump  Cylnder Reservoir from PPC  Trying to constrain the outside dimensions to 12" to best use materials  1/2" Copper Pipe  This length is a make or break dimension for the layout...as you will see.  I use a step bit I had at hand and my cordless on low and bevel the inside lip and my bench sander to knock down the lip.  I collected some parts to play around with...about $140 in misc stuff actually.  Yet anothere torch...I know I have one around here somwhere...  Flux, No-Lead solder  After brightening the areas to be joined with a piece of sandpaper I apply the flux  I clamp the piece in a vice and arrange it so the part I want to heat is going to absorb all that heat (which travels away from gravity)  A little time on the wheel brightens up the part.  After socking down the fittings on each radiator with Rectorseal T5 I carefully aligned the two radiators, brightened and fluxed the areas to be joined and clamped one radiator down to solder the joints  Then I used a number of 45 degree fittings to make a connection from the rad to the pump. The two rads line up well to each other and will fit inside a 12" cube.    That's the layout.
__________________
Quote:
Last edited by CyberDruid : 12-08-07 at 12:03 PM |
||||||||||||||
|
|
|
|
12-06-07
|
#3 (permalink) | ||||||||||||||
|
Scarring Your Psyche
|
Reserved Assembly and Testing
Reseerved
__________________
Quote:
Last edited by CyberDruid : 12-08-07 at 12:02 PM |
||||||||||||||
|
|
|
|
12-06-07
|
#4 (permalink) | ||||||||||||||
|
Scarring Your Psyche
|
Reserved For the Grand Finale
Money Shots
__________________
Quote:
|
||||||||||||||
|
|
|
|
12-06-07
|
#5 (permalink) | ||||||||||||||
|
Scarring Your Psyche
|
heh
 \
__________________
Quote:
|
||||||||||||||
|
|
|
|
12-06-07
|
#6 (permalink) | |||||||||||||
|
EmBROiled in BROmance
 
|
OH MY GAWD.......... I can't wait for this to be finished!
__________________
PC Games I am Currently Playing: Borderlands, Shattered Horizon, Mass Effect My Tech Station by Syrillian
|
|||||||||||||
|
|
|
|
12-06-07
|
#7 (permalink) | ||||||||||||||
|
My FSBs R better than URS
 
|
Is that fan made just for applications like this?
__________________
Quote:
|
||||||||||||||
|
|
|
12-06-07
|
#8 (permalink) | ||||||||||||
|
Intel Overclocker
 
|
 Nice! Subscribed.
__________________
CPU-Z Validation at 3.4Ghz!   10749 in 3DMark06! | P4885 in 3DMark Vantage  Aoccdrnig to rscheearch at Cmabrigde Uinervtisy, it deosn't mttaer in waht oredr the ltteers in a wrod are, the olny iprmoetnt tihng is taht the frist and lsat ltteer be at the rghit pclae. Tihs is bcuseae the huamn mnid deos not raed ervey lteter by istlef, but the wrod as a wlohe.
|
||||||||||||
|
|
|
12-06-07
|
#9 (permalink) | ||||||||||||||
|
Scarring Your Psyche
|
I dunno WTH that fan is for.
It's 24V but runs at 12V like a hurricane...I can only imagine it at 24V...LAWL It was the most expensive fan I have ever purchased. $70
__________________
Quote:
|
||||||||||||||
|
|
|
|
12-06-07
|
#10 (permalink) | ||||||||||||||
|
Scarring Your Psyche
|
Dammit it finally happened to me. The 2 and 3rd Posts are reversed...how strange.
__________________
Quote:
|
||||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
