NCspecV81

Hey, I'm wanting to stuff a single fan radiator in the front of my case using maybe 3 if possible but I have 5 drive bays. I have a stacker 830 and want to use a push/pull setup in the front as I have mesh-like panels that let a lot of air through. SO I need a custom mounted setup for the front that can take up 3-5 bays and is mountable via typical drive holes ect.

I already have a Stinger D-MAX block coming, but I need that if you can do it, and also the rest of a simple kit to cool an e8400 only. Let me know Hombre.

__________________
Personal Best Dual Core 3dmark06 - 24,780
http://service.futuremark.com/compare?3dm06=8426632

sli_shroom

you will have the room if you move the hd cage all the way up. make a couple simple "l" brackets and you could even use the holes for drive mounting. i looked at this setup when i added a second rad, but it was just too crowded with my pump in the same area.

another option is to put the rad up in the x-raptor bay.

__________________

Starholdest

Wait; you want to use 3 single fan rads? WHY?!

__________________

NCspecV81

No. I just want to use 1 single fan radiator.

__________________
Personal Best Dual Core 3dmark06 - 24,780
http://service.futuremark.com/compare?3dm06=8426632

ChielScape

i would recommend you use at least a dual fan radiator. and if you really want to do a single, get the Black Ice GTX120, or the PA160. (not really 120mm, but with shroud it fits a 120mm fan)

__________________
Bigger = better, except for transistor size.
480GTX Club

seaneyo99

I have an Innovatek single 120mm rad. Would have the change the bards on it unless your gonna use 1/4"id tubing

prosser13

Seaney - this isn't Wanted, this is in the CyberDruid PC section

I would go with a PA120.1 personally...

__________________

Starholdest

I see. Maybe you should change your first post...it's a bit confusing.

__________________

CyberDruid

Sorry about the crappy lag.

I have built a CM 830 Stacker with my good friend Spiitz and tried to talk him into LCing the beast...now that he's gone Mac I doubt I will have the chance to try out some ideas.

At the time the focus was on the top. It seems a natural location for a rad.

Not having the case at hand I cannot tell you for sure what would fit and where. THe PA 160 is a great rad...but likely too wide to accomodate the front location you are wanting.

A PA120.1 would be the best choice for that I think as pointed out above. Thanks guys for covering the topic so well.

__________________
I Build Custom Rigs and Work Acrylic. PM for details.... 25,291 3DMark06...21,908 Vantage...Join the Red Tide
Everything You Ever Wanted to Know About CyberDruid................Support Your Local Druid...............Mod Supply Sale

Retrospekt

I have a single 80mm fan radiator that Druid actually sent me in his box of junk. I don't plan on watercooling for a while. It's in my for sale thread.

__________________