|
|
 |
Overclock.net - Overclocking.net > Hardware Vendors > CyberDruidPC | |
Client Build Log: Into the Abyss with Indignity
|
||
 |
|
|
LinkBack | Thread Tools |
02-20-08
|
#1 (permalink) | ||||||||||||
|
sǝsɐɔ ɯoʇsnɔ p1ınq/11ǝs ı
 
|
Client Build Log: Into the Abyss with Indignity
      
__________________
I Build Custom Rigs and Work Acrylic. PM for details. Everything You Ever Wanted to Know About CyberDruid
Last edited by CyberDruid : 03-21-08 at 01:46 PM. |
||||||||||||
|
|
|
02-20-08
|
#2 (permalink) | ||||||||||||
|
sǝsɐɔ ɯoʇsnɔ p1ınq/11ǝs ı
|
Hardware, Cool Parts n Stuff, the Case....
The part of this mod that will set Indignity's Antec 900 apart from any other is the custom front panel.
 Painted in MetalCast Metaflake Blue with a 1/2 routed and polished slab of acrylic...it's one of a kind.  The color matched top panel.   Details: routed and polished slot for a try type DVD burner, detents and holes for the modified SunBeam fancontroller, mountes for a pair of 120mm fans.   The acrylic is permanently fused to the bezel and simply snaps into the chassis making access to the guts of the case simple.  The beginnings of Into the Abyss  The customized panels go on an equally customized chassis painted in a durable automotive grade matte black.  Holes for cable management and the fan of a PSU will make for a neat interior.  The rest of the parts are in production...the customized side panels, grill and associated parts will soon follow 
__________________
I Build Custom Rigs and Work Acrylic. PM for details. Everything You Ever Wanted to Know About CyberDruid
Last edited by CyberDruid : 02-20-08 at 03:08 PM. |
||||||||||||
|
|
|
|
02-20-08
|
#3 (permalink) | ||||||||||||
|
sǝsɐɔ ɯoʇsnɔ p1ınq/11ǝs ı
|
The Build
Phase one: The Gathering of the Silicon Godz.
For any enthusiast one the more entertaining parts of building a PC is probably researching and finding and purchasing all the necessary gear. There are so many options...thinning it down to the actual purchases and final build is always a challenge. This build is a little different. Almost all of the parts needed are on hand here at the shop. Indignity is going for a Q6700 (purchased) Asus P5K Deluxe Wifi (here) eVGA 8800GT KO (here) platform. He already has the RAM and PSU he needs (in transit to me) and the LC parts and DVD burner I have in stock. He's on the prowl for some fast HDDs to RAID but that's no problem. Of course the HW spec may change a bit...I leave that open to improvement...but I have taken into consideration that Indignity is looking for a stable easy to OC platform for a single card. I really can't think of a better $200 board than the Asus P5K deluxe... That said I would not hold it against him if he up, down or side-graded to some other platform...to me it's all good. My focuse will be on the custom case, assembly of whatever parts we choose and the final tweaks and touches that will make his rig a real showpiece. More to come!               There it is: Into the Abyss At this stage the rig has been plumbed. No real cable management has yet taken place. The HDDs are yet to be installed.  Ready for HDDs.  A pair of Raptors and a pair of Samsung 750GB and 4 pairs of Scythe AV mounts.  The drives simply slide in.  And are secured by thumbscrews.  This improves case airflow over stock. Plus it dampens the Raptors for better performance.  I had to rework the fan mounts as the drives are slap up aginum. Self locking acorn nuts...  Still a ways to go.  I am liking the EK reservoir.  I doubt I will ever make another acrylic base just like that...  My first effort at window etching...not bad.  Though taller it looks balanced...it's a tad heavier now too.  The Matrix thinger came with scant printed instructions and I will look on the disc to see if there is anything to help me figure it out. but I think I should be able to change out the external usb cable with an internal cable...  I lost an 1/8" with the fancy side panel and I hope that is not a critcal 1/8". The FSP is not lacking in cables...it makes me want to take the snippers out...  I am waiting on some cables I special ordered...should be here soon.    Into the Abyss
__________________
I Build Custom Rigs and Work Acrylic. PM for details. Everything You Ever Wanted to Know About CyberDruid
Last edited by CyberDruid : 03-15-08 at 01:51 PM. |
||||||||||||
|
|
|
|
02-20-08
|
#4 (permalink) | ||||||||||||
|
sǝsɐɔ ɯoʇsnɔ p1ınq/11ǝs ı
|
Final Assembly: Finishing Touches
     
__________________
I Build Custom Rigs and Work Acrylic. PM for details. Everything You Ever Wanted to Know About CyberDruid
Last edited by CyberDruid : 03-15-08 at 01:49 PM. |
||||||||||||
|
|
|
|
02-20-08
|
#5 (permalink) | ||||||||||||
|
sǝsɐɔ ɯoʇsnɔ p1ınq/11ǝs ı
|
The rambling monolog....you know the routine
So what are we doing for Indignity? Whatever he wants! Basically the man has thrown buckets of money at me and now it's up to me to make him happy. I can do this  After a couple of days of discussion and looking at a variety of options we settled on the Antec 900. As some of you probably remember I have a soft spot for this case and have built a number of them in the past year. I think they are a very nicely designed case: if you are a modder  I see a lot of potential in the basic design and simply remove everything that conflicts with this vision. The mesh HDD cages: in the bin.... The funky window on the side panel....chop it out. 200mm fan? Put it to work pushing air through a radiator of course THe two things Indignity wants for sure are a CPU loop LCS and a custom side panel window. The exact details of this are still be worked out. There are a number of options to consider and I have a couple of new ideas I would like to explore. In the past I have mounted a rad under the fan and a rad over the fan...but I feel like putting a rad in a pedestal base this time. This is not set in stone...because there are always technical difficulties to overcome and it's always good to have Plan B Plan C and even Plan D as backup  The window will be UV blue and discreetly lit to evoke the feeling of being underwater...at this time I am thinking to use a d-Tek FuZion, MCP655 Vario, Bay reservoir and PA 160 radiator. These have proven to work extremely well in a number of different builds. The PA 160 could either mount on top of the case in a tasty manner...or it could be concealed in a ventilated base with a fan in the chassis floor...I am leaning toward the base to keep the case looking super sanitary inside. I want to do something a little special to the exterior panels...I have this scroll saw I need to put to work...and might try my hand at some artistic perforations on the blind side panel and then light that from within....we'll see how that works for me More rambling to follow as the build gels 
__________________
I Build Custom Rigs and Work Acrylic. PM for details. Everything You Ever Wanted to Know About CyberDruid
Last edited by CyberDruid : 02-20-08 at 03:23 PM. |
||||||||||||
|
|
|
|
02-20-08
|
#6 (permalink) | |||||||||||||
|
I'm Off Topic
|
Feb 20, 2008:
Components still being ironed out. I just worked out a deal for a nice 74GB Raptor over at [H](thanks holli4pirating). I kinda want to keep a Hardware inventory of sorts here to make sure that #1, CD has enough $$ for what he needs & #2, I purchase/send him items I want in the build. Here's what we have so far:
updated 2-20-08 9:05pm added 120mm fans updated 2-21-08 9:05pm added 2nd Raptor updated 2-22-08 1:50pm Changed RAD to Thermochill PA120.2 updated 2-28-08 2:20pm added Matrix Orbital MX231 & 22" SamSung LCD updated 03-02-08 4:50pm 2 x 750GB F1 32mb Samsung SATAII drives For those of you on the fence about a build from a professional like CD, don't hesitate to drop him a PM with your ideas. Maybe you can't afford the latest & greatest components at the moment, well why not pimp out what you have??? My story is a little sadder I have to say. My grandmother is currently in Hospice and my family(and my bro) is all she has. She has progressively gotten worse, but is still hanging on for some reason. During one of our "clear-the-air" conversations during this time, she told me to "Get something nice with the money", so here we are. This has also kept me sane during the process because it's fun to read & think about what I really wanted. Don't feel any remorse for me or my family. My grandmother is 82 years old & could have had medical intervention, which she chose not to. She's at peace with it, so I'm at piece with it. When she goes, I'll be heartbroken, but I'll know she's in a better place with my mother and my grandmother's sister. Also, although I'm "technically savvy", I do not have the tools, patience or willpower to do my own work and I have been admiring CD's work for a couple years now.... I'm soo happy i'm going to go admire my new ePeen for a while.. I'd personally like to thank the people that have helped out by simply offering awesome parts at very good prices in the various F/S sections across the innerwebz.... And most of all CD whose patience thus far has been impeccable!!!
__________________
Please don't power down your PC! Get involved with Folding@Home for Team #37726! Help Save A life!!!! Every little bit helps & you can even fold with most Video Cards!
Last edited by Indignity : 03-19-08 at 07:52 AM. Reason: Added more stuff |
|||||||||||||
|
|
|
02-20-08
|
#7 (permalink) | ||||||||||||
|
Security Sleuth
|
YAY a New CD Build log. I'm telling you Indignity CD is Crack for the AT900
|
||||||||||||
|
|
|
02-20-08
|
#8 (permalink) | |||||||||||
|
Overclocker in Training
|
will you do that for my antec 900?!? lol
very nice
__________________
Quote:
FOR SALE: BLACK 8GIG ZUNE MY GAMING SETUP (STILL WAITING TO GET NEW COMPUTER)
|
|||||||||||
|
|
|
|
02-20-08
|
#9 (permalink) | ||
|
sǝsɐɔ ɯoʇsnɔ p1ınq/11ǝs ı
|
Quote:
  Quote:
Take a number Thanks for the listing Indignity...that's a good thing to have up in this thread. I'm excited about this build and I will be pushing myself to try some new things. Hoping it warms up a bit...but if I have to mod in a snowsuit so be it BTW it's the last Lunar Eclipse till 2010...a fitting time to start this build |
