|
|
|
 |
Overclock.net - Overclocking.net > Hardware Vendors > CyberDruidPC | |
Client Build Log for KennyMester
|
||
 |
|
|
LinkBack | Thread Tools |
07-08-08
|
#1 (permalink) | |||||||||||||||
|
Scarring Your Psyche
 
|
Client Build Log for KennyMester
Quote:
I am modifying the tech station I just made with a custom front panel featuring some UV acrylic and a lotta fretsaw work... Below is how the station started off.    And what follows is the work involved in the front panel.  I removed this panel with the PA160 floating in ti (friction fit)  And made a composite panel of 1/4" clear, 1/8" UV orange and 1/8" black.  I made a template to route out a perfect 120mmm fan hole and drill the holes...  The idea is to get the UV orange to show through the black by having at the black with a fretsaw for a few hours...  Check out this programmable POV fan from Cooljag. Not cheap...you can program the fan via USB to display just about anything you want.  I temporarily mounted the comnposite panel to have a look at this fan.  There is a tiny PCB that spins around and lights up a sequence of LEDs to spell out phrases and display images through POV (persistence of Vision) technology.  I will post up some short vids in a bit. A camera does not captuire the effect...  I dialed in the panel once I had the edges dressed a bit better and it was firmly bolted to the angles.  I used a 45 bit to reveal some of the orange beneath the black to make a ring around the fan hole.  I used some tribal flame patterns I found to inspire me.  Once I had a rough sketch I folded the paper and used a light box to trace something simlar on the other half.  I didn't want to get too "50's Hotrod" with the scalloped flames and went for more of a tribal free style look.  This is closer to what I will be cutting out but I will use it just as a rough guide.  I then drilled holes for the fretsaw blade in all the areas I want to remove.  This is going to take a while....  The start of a long afternoon....  About an hour later (I guiess). More in a bit.
__________________
Quote:
|
|||||||||||||||
|
|
|
07-08-08
|
#2 (permalink) | |||||||||||||
|
Case Modder
 
|
Very Cool!
__________________
Halloween Props - Custom Laptop Cooler - Triple Fan Drive Bay Mod Aumotocnic"An unfortunate member of the overclock.net insomnia club" HD2900XT Info Thread - Jack Mini MicroATX Build - CRT Mod
|
|||||||||||||
|
|
|
|
07-08-08
|
#3 (permalink) | ||||||||||||
|
:)
 
|
That hole idea is amazing - it looks great CD
 And those flames, wow xD Can't wait to see it finished! Are you only cutting flames in the front of the 3 I take it?
__________________
-----------------------------------------------
Quote:
|
||||||||||||
|
|
|
07-08-08
|
#4 (permalink) |
|
goad ting i r dislekxic
 
|
thats pretty sweet looking cd
__________________
Total Posts: 666 (6.66 posts per day)
Private Messages: Unread 0, Total 666. Project:Fishy updated: 5/10/09 best thread ever washington state overclockers the 450 dollars folding rig that will amaze you does your E21x0 have a fsb wall E6600@4.005ghz Q6600@4.005ghz click me 892/2000 spent |
|
|
|
|
07-08-08
|
#5 (permalink) | ||||||||||||
|
PC Gamer
 
|
Great job with the flames, it looks fantastic.
__________________
3D Mark 06 - 14051
|
||||||||||||
|
|
|
|
07-08-08
|
#6 (permalink) | |||||||||||||
|
Going Broke Overclocking
 
|
 That is going to look SWEET! Do you ever run out of ideas? J/K 
__________________
"Life is Learning, Learning is Sharing, Sharing is Life" "Overclocking is like a drug addiction, the difference is we go broke improving our brain cells instead of destroying them!" Where in the world to buy on-line Dual or Multi Partition and Why
Everyone, GET Folding, it is important no matter how much you contribute Phenom II should be called Ph II, not a P II because it isn't an old Intel 
|
|||||||||||||
|
|
|
|
07-08-08
|
#7 (permalink) | ||||||||||||||
|
Scarring Your Psyche
|
Hey guys I got zapped by lightning twioce this evening. Second time it burned my ass pretty good...I was working at the saw there and a wicked sotrm rolled over and when a bolt struck in the woods I got a strong zap on my hand where it was resting on the saw table...I was like Hmmmmm what are the chances of that happening again. So I kept working and a fgew seconds later a huge strike right beside the shop I could see the light from the bolt through the window like a flash camera went off and the next thing I know I am staggering backwards...my ass feels like it's on fire and my whole upper body is hurting like I got nailed by a bag of oranges.
I apparently knocked over my drill as I was flailing about. Anyhoo I sat on the wood bench as far from anything metal as I could until the storm finished...then I went back to work. I got the front panel pretty much done...it looks wicked. And it has some lightning bolt still in it so look out! I'll post up pics as soon as I finish this beer... To entertain you in the meanwhile a short vid of a POV fan.
__________________
Quote:
|
||||||||||||||
|
|
|
|
07-08-08
|
#8 (permalink) | ||||||||||||
|
PC Gamer
|
that fan is sweet.
__________________
3D Mark 06 - 14051
|
||||||||||||
|
|
|
|
07-08-08
|
#9 (permalink) | ||||||||||||||
|
Scarring Your Psyche
|
A teaser...wait for the lit shots...
__________________
Quote:
|
||||||||||||||
|
|
|
|
07-08-08
|
#10 (permalink) | ||||||||||||||
|
Intel Overclocker
|
Quote:
__________________
Team Fortress 2 ID = [OCN] Grafixs ^ Microphone is broken for now  ^ My Anti-Drug Audi A4 2.0T Stage II+ 297HP 335 ft/lbs
|
||||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
ß₤ứə Çřёώ
