DICE run going down! - Page 5 - Overclock.net

**mega_option101** · 01-17-09

Quote:

Originally Posted by coolwhip

e6300 right now.

i might do the e8500 tomorrow, but i dont know if i want to risk killing it

Sweet!!

Do you have any screen-shots of what you were able to achieve yet?

bartx · 01-18-09

Congrats

E6300 is hard to clocking due to low multiplier - you need a good board. On E6420 I have 579 FSB (validation) but it was absolutely the end (I think that motherboard was a bottleneck). I saw even 666 FSB on hwbot (e6550) so it's possible. Maybe your ram is too weak?

And about pot - nice idea, but what your temps in idle and load? On normal pot you should have even -65 to -70C temps and trust me - it really affects your clocks

And try to fill your pot with dice, because it may help a little.

I suggest trying with e8500, just don't set vcore above 1,8V and everything should be ok. It's a lot of better cpu to clocking, even for newbies

coolwhip · 01-18-09

well i added bb's like ira said. and once again he is the man.

the temps are still dropping, but im getting almost 10 degrees colder with them

@ bartx ya this board has seen over 575 noproblem already, but im gonna take my time today and push it hard, last night i shuold have tooken my time more. ill get an idle and load once the temps are done dropping. but im still gonna try the e6300 cause i know i can get more out of it. but ill try and do a run on the e6300 within a week or 2. i also have a celly #330. not sure how well itll clock. but its got a nice high multi, so we'll see what i can get on air first.

"**edit* run on the e8500 in a week or too^^

**mega_option101** · 01-18-09

Quote:

Originally Posted by coolwhip

well i added bb's like ira said. and once again he is the man.

the temps are still dropping, but im getting almost 10 degrees colder with them

@ bartx ya this board has seen over 575 noproblem already, but im gonna take my time today and push it hard, last night i shuold have tooken my time more. ill get an idle and load once the temps are done dropping. but im still gonna try the e6300 cause i know i can get more out of it. but ill try and do a run on the e6300 within a week or 2. i also have a celly #330. not sure how well itll clock. but its got a nice high multi, so we'll see what i can get on air first.

Best thing to do is first is to find out what your max FSB on air (low multi) is.

That way you aren't wasting too much time when it comes time to doing your DICE runs

You'll already know what kind of max you'll be able to do so you can start from there

coolwhip · 01-18-09

Quote:

Originally Posted by mega_option101

Best thing to do is first is to find out what your max FSB on air (low multi) is.

That way you aren't wasting too much time when it comes time to doing your DICE runs

You'll already know what kind of max you'll be able to do so you can start from there

haha ya
tried booting, but it wont even post. it just like turns on and the little ed's on the mobo tht light up when it posts turn on and it just sits there, it doesnt even reboot. trying to reset cmos right now

**mega_option101** · 01-18-09

Quote:

Originally Posted by coolwhip

haha ya
tried booting, but it wont even post. it just like turns on and the little ed's on the mobo tht light up when it posts turn on and it just sits there, it doesnt even reboot. trying to reset cmos right now

Yeah, best thing to do is reset it wait 5 minutes or so and start it back up

coolwhip · 01-18-09

Quote:

Originally Posted by mega_option101

Yeah, best thing to do is reset it wait 5 minutes or so and start it back up

lol ya thts what im doin. but right now temps are at -58. of course the rigs off right now, but ya

*edit* hm i ran burntest @ stock speeds and it crashed, now its doing the same not posting thing. idles are at -57 though

**mega_option101** · 01-18-09

Quote:

Originally Posted by coolwhip

lol ya thts what im doin. but right now temps are at -58. of course the rigs off right now, but ya

*edit* hm i ran burntest @ stock speeds and it crashed, now its doing the same not posting thing. idles are at -57 though

Can you post at stock speeds/settings?

coolwhip · 01-18-09

Quote:

Originally Posted by mega_option101

Can you post at stock speeds/settings?

okay what happened was i came downhere. put some ice in and everythign. let temps are drop. tried to boot, and it would turn on. but not post. it would just stay there like i just hit the on button lol. so i took battery out for like 5 mins and it posted. got into windows, tried to run burntest to get a load temp, it froze up, than crashed. and now it wont post again. i have the battery out right now, but ya.

*edit* okay got it to post again. but soon as i got into windows, it crashed. didnt evne have time to grab my mouse.

im guessin she's a goner. so what should i do. run ginormous volts through her. or try the e8500, or the celly?

coolwhip · 01-18-09

okay i hit the power thing, it gets power for like half a second, than shuts off. cmos reset doesnt help.
and the celly doesnt have any decent voltages options on this board.
should i try the e8500?

*edit* ahhh double post =/

01-18-09	#42 (permalink)
bartx Extreme Cooler Join Date: Nov 2008 Location: Pszczyna, Poland Posts: 257 Rep: 47 Unique Rep: 23 Trader Rating: 3	Congrats E6300 is hard to clocking due to low multiplier - you need a good board. On E6420 I have 579 FSB (validation) but it was absolutely the end (I think that motherboard was a bottleneck). I saw even 666 FSB on hwbot (e6550) so it's possible. Maybe your ram is too weak? And about pot - nice idea, but what your temps in idle and load? On normal pot you should have even -65 to -70C temps and trust me - it really affects your clocks And try to fill your pot with dice, because it may help a little. I suggest trying with e8500, just don't set vcore above 1,8V and everything should be ok. It's a lot of better cpu to clocking, even for newbies __________________ http://www.bartxstore.cba.pl/ C2D E6420 @ 4629MHz Celeron D347 @ 7360MHz PDC E5200 @ 5340MHz Ballistix PC8500 @ 1400MHz CPU pots http://www.overclock.net/dry-ice-liq...ew-series.html Dice/LN2 cpu pots on request.

		Overclock.net - Overclocking.net > Cooling > Dry Ice/ Liquid Nitrogen
DICE run going down!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)