Overclock.net - Overclocking.net - Case Mods - General Discussion http://www.overclock.net/ en Fri, 20 Nov 2009 22:37:22 GMT vBulletin 1 http://static.overclock.net/images/oc/misc/rss.jpg Overclock.net - Overclocking.net - Case Mods - General Discussion http://www.overclock.net/ Custom Vertigo Case http://www.overclock.net/case-mods-general-discussion/612911-custom-vertigo-case.html Fri, 20 Nov 2009 20:43:21 GMT Heres my idea, a tower. So far its an idea, i might do, might not. Not traditional ones like have lots of depth and height. But my tower will be very tall comparing to most cases, but will not have a lot of depth, length, or width. It's basically this but a tower. The shape of it is how the world trade centers looked like. A tall square.

Here are some pictures i did in google sketchup. The external will be a wooden color, probably something close to mahogany but lighter, maybe rosewood. The blue surfaces will be blue led fans. The rectangle with the red circles will be the power, reset, usb, esata switches. The gray surfaces on the side will be either plexi or acrylic. The whole case will be made out of wood. Now since I don't have a lot of depth. The hdds will be hanging vertically just below the top fan.

Heres what I want to ask you. Should windows be plexi or acrylic. How high do you think it should be with front 3 140 mm fans or 120, power switch, reset switch, space for lcd fan controller like this one, and 5 external 5.25 inch slots.

I will use parts from my rig if i build this. So matx mobo panel. Space for 5-6 hdd's hanging vertically from top, right below top fan. What do you think the length and width should be?

I think, the length and width should be 12 by 12 or 14 by 14. And a height of 4 feet should suffice.
Attached Thumbnails
Click image for larger version Name: back.png Views: N/A Size: 84.8 KB ID: 129960   Click image for larger version Name: front side.png Views: N/A Size: 170.4 KB ID: 129961   Click image for larger version Name: tower.JPG Views: N/A Size: 35.3 KB ID: 129962  
]]> Case Mods - General Discussion Speedma11229 http://www.overclock.net/case-mods-general-discussion/612911-custom-vertigo-case.html Antec 902 window mod help http://www.overclock.net/case-mods-general-discussion/612802-antec-902-window-mod-help.html Fri, 20 Nov 2009 16:56:55 GMT Thinking of doing my first case mod, the 902 has enough airflow that I don't use the side fan, so I want to open it up like this: http://www.overclock.net/attachments...w-dsc07188.jpg

If I cut out my window, can I get away with not repainting it by using some piping like this guy, and anyone know where to get this type of piping? Was gonna just use a drill/holesaw/jigsaw for the job...


Also, what's this filter thing on the front of this rig? Custom or can I get it somewhere?

http://img255.imageshack.us/img255/6...5170609sl8.jpg

cheers ]]> Case Mods - General Discussion dopey http://www.overclock.net/case-mods-general-discussion/612802-antec-902-window-mod-help.html carbon fiber http://www.overclock.net/case-mods-general-discussion/612649-carbon-fiber.html Fri, 20 Nov 2009 07:37:27 GMT anyone make any cases or tech stations out of carbon fiber anyone make any cases or tech stations out of carbon fiber ]]> Case Mods - General Discussion transit921 http://www.overclock.net/case-mods-general-discussion/612649-carbon-fiber.html 365nm and 375nm UV LEDs (moaaar UV, less violet) http://www.overclock.net/case-mods-general-discussion/612614-365nm-375nm-uv-leds-moaaar-uv.html Fri, 20 Nov 2009 06:23:34 GMT Hi,

Just thought I'd share this find with you guys.
The Nichia company produces VERY low wavelength UV length. The common UV LED you'll find in modding stores is around 395-405nm if not worse. These have a lot of visible violet and you may not like the effect it produces.
Nichia produces 365-375nm UV LEDs...
Nichia imposes paperwork requirements on purchasers. Purchasers must sign paperwork agreeing to heed warnings about eye hazards of the UV, pass on warnings of the eye hazards of the UV, release Nichia from liability for UV eye hazards, and also to not reverse-engineer the UV LEDs, and not even do failure/defect analysis on bad UV LEDs without Nichia permission (I suspect Nichia fears that could yield reverse engineering data).

The common lamp type models are only sold by bags of 100 but if ya really want them maybe some group orders can be arranged on OCN ...


Over and out. ]]> Case Mods - General Discussion Infrabasse http://www.overclock.net/case-mods-general-discussion/612614-365nm-375nm-uv-leds-moaaar-uv.html How do I get the aluminum macbook effect? http://www.overclock.net/case-mods-general-discussion/612514-how-do-i-get-aluminum-macbook.html Fri, 20 Nov 2009 02:11:00 GMT I apologize ahead of time if this isn't the right forum to put this in. :o

I'm making an amp case out of aluminum and I wanted to get that matte/satin finish that the macbooks have.

I've read around and I think what I'm trying to do is etch the aluminum, but I'm not entirely sure about that.

Do you guys know how to get the effect I'm looking for? ]]> Case Mods - General Discussion getllamasfast http://www.overclock.net/case-mods-general-discussion/612514-how-do-i-get-aluminum-macbook.html Sound Sensitive LEDs http://www.overclock.net/case-mods-general-discussion/612450-sound-sensitive-leds.html Fri, 20 Nov 2009 00:35:10 GMT I want to wire a series of leds that react to audio coming from an input. i really want to get into soldering since i do have a lot of soldering stuff. What do i need and how do i set it up? Ps. my mom threw out my old iron, can you guys recommend me a new one under 30-40 bucks? EDIT: look at... I want to wire a series of leds that react to audio coming from an input. i really want to get into soldering since i do have a lot of soldering stuff. What do i need and how do i set it up?
Ps. my mom threw out my old iron, can you guys recommend me a new one under 30-40 bucks?
EDIT: look at this would this work? how do i wire it up. sorry for the newbness :o ]]> Case Mods - General Discussion samster25 http://www.overclock.net/case-mods-general-discussion/612450-sound-sensitive-leds.html Nzxt Beta cable management http://www.overclock.net/case-mods-general-discussion/612224-nzxt-beta-cable-management.html Thu, 19 Nov 2009 17:22:56 GMT Hey guys,

How would I go about starting the cable management on the above mentioned case? It has two "cable management holes" on the side of the motherboard, but none near the power supply (where you should start running cables from). Do I just "pull" them to the side near the drives bay and then pull inside the cable holes? Confused.

Thanks a bunch, guyzzzz! ]]> Case Mods - General Discussion godsgift2dagame http://www.overclock.net/case-mods-general-discussion/612224-nzxt-beta-cable-management.html <![CDATA[[ABT]Nvidia auctions on eBay]]> http://www.overclock.net/case-mods-general-discussion/612190-abt-nvidia-auctions-ebay.html Thu, 19 Nov 2009 16:07:02 GMT
Quote:
Ultimate NVIDIA Themed Gaming System for Auction on eBay – 100% of proceeds going to The Leukemia & Lymphoma Society!

One of the fastest and most tricked out PCs ever built is up for auction on eBay
SOURCE ]]> Case Mods - General Discussion wolf2009 http://www.overclock.net/case-mods-general-discussion/612190-abt-nvidia-auctions-ebay.html Need some advice on lighting layout http://www.overclock.net/case-mods-general-discussion/611832-need-some-advice-lighting-layout.html Thu, 19 Nov 2009 00:04:42 GMT Here is a pic of what I have in mind



The 3 fans have 4 blue leds each

The WC tubing will be UV reactive blue

I'm gonna put in a bay reservoir which is also UV reactive blue with 2 blue leds

It's a mid tower case.

I definately want enough UV lights to get the most out of the tubing and reservoir but I don't think that's gonna be enough to light up the whole case so I want to put some blue ccfl's as shown in the diagram.

I don't want to overpower the case with a ton of lights though. It's kind of a trial and error thing to get it perfect but I'd like to hear what u guys think.

BTW - real pros draft in Paint :cool:

::edit:: is 4 12" ccfl overkill for a mid tower case? ]]> Case Mods - General Discussion stilllogicz http://www.overclock.net/case-mods-general-discussion/611832-need-some-advice-lighting-layout.html Sharkoon Quad Cathode Kit : UV http://www.overclock.net/case-mods-general-discussion/611693-sharkoon-quad-cathode-kit-uv.html Wed, 18 Nov 2009 19:50:00 GMT hi
I would like to know if these uv cathodes are good quality. (if they aren't could you please give me a link to better cathodes)

link: http://www.specialtech.co.uk/spshop/...2&cat=0&page=1

thanks
Anish :) ]]> Case Mods - General Discussion Anish http://www.overclock.net/case-mods-general-discussion/611693-sharkoon-quad-cathode-kit-uv.html Building with acrylic PLease help http://www.overclock.net/case-mods-general-discussion/611450-building-acrylic-please-help.html Wed, 18 Nov 2009 06:37:38 GMT hey so i am building a watercooled case from scratch for my ion build that im doing for this guy so i need help please: What kind of acrylic (how thinck) should i use to make the shell of the case? Where to buy the good acrylic (in different colors preferably, if possibe)? Should i still lay an... hey so i am building a watercooled case from scratch for my ion build that im doing for this guy so i need help please:
What kind of acrylic (how thinck) should i use to make the shell of the case?
Where to buy the good acrylic (in different colors preferably, if possibe)?
Should i still lay an aluminum motherboard tray if i may call iit or can i just screw the motherboard holders directly into acrylic(meaning it wount shatter or anything)?
Please help me.
I will have a scetch as soon as i upload in solidworks
thank you ]]> Case Mods - General Discussion RushMore1205 http://www.overclock.net/case-mods-general-discussion/611450-building-acrylic-please-help.html My Antec 300 http://www.overclock.net/case-mods-general-discussion/611268-my-antec-300-a.html Wed, 18 Nov 2009 01:37:04 GMT Hey guys,

Here is my Antec 300. I have painted the interior black and cut some holes for cable management so far. I had to RMA my motherboard, supposed to be back on the 26th.

I'm thinking of cutting a side panel and was wondering if Home Depot carries everything I would need. I have a Dremel + a jig saw already.

The paint is definitely not the best, but the camera brings out the worst parts of it.



Pain looks horrible, but it really isn't bad at all in person.




Hard to see in the picture, but the drive bay covers are now just mesh. I want to stealth my drive. I will do that if I buy a fan controller which I plan on doing soon.


Just bought me a Dark Knight for my e8400, can't wait to try it out!


Desk. The lamp is temporary until I can find something else.:
]]> Case Mods - General Discussion Lyfskills http://www.overclock.net/case-mods-general-discussion/611268-my-antec-300-a.html Cheap place to get this stuff? http://www.overclock.net/case-mods-general-discussion/611114-cheap-place-get-stuff.html Tue, 17 Nov 2009 21:18:36 GMT I'm planning a project out for this case, the Lian-Li A05N, but I don't want to break bank in the process. I'm wondering where I can get the following for cheap:

- Some decent mesh. This is exactly the kind of thing I'm looking for, but there's no way I'm paying so much for a sheet of that size.

-Momentary switches. Need ones similar to these, but preferably without being $20.

-Smoked acrylic. I've looked at a few sites, but I'm not really sure what's reliable and what isn't.

Suggestions? ]]> Case Mods - General Discussion Thosesneakyfrench http://www.overclock.net/case-mods-general-discussion/611114-cheap-place-get-stuff.html Simple mods, complete newb, need help. http://www.overclock.net/case-mods-general-discussion/610925-simple-mods-complete-newb-need-help.html Tue, 17 Nov 2009 14:58:13 GMT I'm completely new to case modding, and wanted to put a window in my CM690 after painting it completely black.
I wanted to paint the whole thing black, and then put in a side panel window that just shows off the hardware inside. :D
How should I go about this? What tools would I need? What materials?
I am a complete newbie so please explain in layman terms. :o ]]> Case Mods - General Discussion hackm0d http://www.overclock.net/case-mods-general-discussion/610925-simple-mods-complete-newb-need-help.html <![CDATA[CM690+HD5970=Ooooh, that's not gonna fit.]]> http://www.overclock.net/case-mods-general-discussion/610890-cm690-hd5970-ooooh-thats-not-gonna.html Tue, 17 Nov 2009 11:44:57 GMT Any solution other than a hacksaw or a different case? [...probably not, huh?] The only thing I can think of is if that lower section can be rotated. Can it and do you think that will that suffice? [EDIT: Upon 2nd look I'm not sure that will work either, there are trays ans the whole thing may be too narrow.]

Plan:


Problem:
]]> Case Mods - General Discussion thegreatsquare http://www.overclock.net/case-mods-general-discussion/610890-cm690-hd5970-ooooh-thats-not-gonna.html Acer veriton 2800 (smal case) http://www.overclock.net/case-mods-general-discussion/610853-acer-veriton-2800-smal-case.html Tue, 17 Nov 2009 08:38:15 GMT Hi

I'm using a acer vertion as a "help" pc, at my own workplace. Using it to find guides and so on while fixing other pc's.

The trouble is that this pc is making a lot of noise, I've never used a small case like this before, so how to make this pc more silent?

Is it easy to change fans and so on? This is not my main computer, this will only be used while fixing pc (and parts)

Frode

This computer Veriton ]]> Case Mods - General Discussion FrodeMolland http://www.overclock.net/case-mods-general-discussion/610853-acer-veriton-2800-smal-case.html Brightest Cold Cathodes http://www.overclock.net/case-mods-general-discussion/610730-brightest-cold-cathodes.html Tue, 17 Nov 2009 04:02:01 GMT I'm shopping around for a set of 12" blue and maybe also a set of 4" blue cold cathodes, was wondering if any of you guys could recommend the brightest ones you've run across? ]]> Case Mods - General Discussion stilllogicz http://www.overclock.net/case-mods-general-discussion/610730-brightest-cold-cathodes.html Building an aluminum case http://www.overclock.net/case-mods-general-discussion/610724-building-aluminum-case.html Tue, 17 Nov 2009 03:48:50 GMT Not sure if this is the right section, but whatever. So I am planning to build a ATX case out of aluminum. Anyone who has quality aluminum cases (Lian Li, etc), could you post how thick the panels are in the cases? I don't know how thick of metal to use, and don't want to use too thin of metal.
Will post some hand drawn plans when I draw them up ]]> Case Mods - General Discussion mrfajita http://www.overclock.net/case-mods-general-discussion/610724-building-aluminum-case.html Riveting http://www.overclock.net/case-mods-general-discussion/610618-riveting.html Tue, 17 Nov 2009 01:19:28 GMT Hi All, Im having trouble with riveting my case. I just painted and now Im having trouble getting it back together. When I clamp down on the handles of the rivet gun to the point where it should be down. It shoots off out of the gun, and the nail part gets stuck in the gun itself, after making a... Hi All,

Im having trouble with riveting my case. I just painted and now Im having trouble getting it back together. When I clamp down on the handles of the rivet gun to the point where it should be down. It shoots off out of the gun, and the nail part gets stuck in the gun itself, after making a popping sound.

Im wondering if I drill too much of the hole, and now I will have to get a bigger size rivet? I was using a1/8 size rivet, prob will have to drill at 3/16
and get 3/16 size rivets. Something isnt working right?
__________________ ]]> Case Mods - General Discussion madhung24 http://www.overclock.net/case-mods-general-discussion/610618-riveting.html <![CDATA[Scratch Build (but don't get too excited)]]> http://www.overclock.net/case-mods-general-discussion/610564-scratch-build-but-dont-get-too.html Mon, 16 Nov 2009 23:25:12 GMT This isnt a worklog, yet.

This has been in the works for a long, long, long time - some of you may remember I had a similar post a couple of months back. But I've been promised a Dremel for Christmas, I've got my sig rig to put in it, and an H-50 soon. I've got some questions at the end and am looking for any suggestions or opinions at all. I'll consider everything you say because I want this case to be perfect. Now here's the good bit.

Total Dimensions (Excluding feet): 354mm(h) x 422mm(d) x 346mm(w).

Overall View


Front View - Stealthed DVD-rom Drive, 4x 120mm fans


Side View - Funny Shaped Window


Top View - 25mm Fan, 2 Fan Speed Controllers, Power Button


Internal View - (Colour changed for visibility, it's impossible to see detail when it's black.)


Components View


Alternate Colours - :thinking:


Just a few questions:
  • In terms of chosing a Dremel, I seem to only need 2 guides - Rotary and Edge. Some hole-saw pieces for small holes, but what sort of cutting bits do I need? I'm pretty clueless here :confused: (Also how would I go about cutting the DVD-rom drive slot on the front of the cover, it's the only thing I cant work out at the moment!).
  • Does anyone know a good place to buy acrylic and glue in the UK?
  • My side panels will be removable through means of 4 thumbscrews:

    But how can I tap those screws into the acrylic block behind? Perhaps drill a hole through it and glue a nut into the block?
  • I don't like the way I've got my power button and fan control knobs. They just dont seem to fit. Anyone have any ideas, I just want to make them as stealthed and inobtrusive as possible really.
  • What colour? My original intention is 90%opaque-black/transparent windows, with blue lighting, though the white/bright-blue looks kinda funky but a bit Mac-y :doh:

Ok, that's all my questions for now. I'm sitting here trigger-happy on my rep button ;) Absolutely any opinions are welcome!

I can post more pics of different parts/colours on request.

Killhouse :drunken: ]]> Case Mods - General Discussion Killhouse http://www.overclock.net/case-mods-general-discussion/610564-scratch-build-but-dont-get-too.html HAF 932 Wall Of fans Build Complete http://www.overclock.net/case-mods-general-discussion/610473-haf-932-wall-fans-build-complete.html Mon, 16 Nov 2009 20:21:54 GMT Since people asked me how i attached this wall of fans to my case i've made this thread to show how.

Questions / comments welcome.

Cheers.

















]]> Case Mods - General Discussion Mariusz803 http://www.overclock.net/case-mods-general-discussion/610473-haf-932-wall-fans-build-complete.html Cold Cathode Question http://www.overclock.net/case-mods-general-discussion/610452-cold-cathode-question.html Mon, 16 Nov 2009 19:49:41 GMT Hey guys, I broke one of my cold cathodes the other day when I was putting my new motherboard in, so I ordered another set. So I have one left over I was thinking of installing it under my desk to illuminate my keyboard and mouse. Does anyone know of or could point me in the direction of... Hey guys,

I broke one of my cold cathodes the other day when I was putting my new motherboard in, so I ordered another set.

So I have one left over I was thinking of installing it under my desk to illuminate my keyboard and mouse.

Does anyone know of or could point me in the direction of maybe a guide for making a little power box and switch for it.

Thanks in advance. ]]> Case Mods - General Discussion DazTora http://www.overclock.net/case-mods-general-discussion/610452-cold-cathode-question.html need help deciding on itx case design http://www.overclock.net/case-mods-general-discussion/610293-need-help-deciding-itx-case-design.html Mon, 16 Nov 2009 11:21:51 GMT i need some help deciding on the case design. the hardware:mobo - Intel BOXD945GCLF2 psu - picoPSU 90W HDD - WD 500GB 3.5 there are 2 basic options 1.a more cubic design - w 185mm * h 85mm * d 185mm Image: http://img26.imageshack.us/img26/6752/88200334.jpg Image:... i need some help deciding on the case design.
the hardware:
mobo - Intel BOXD945GCLF2
psu - picoPSU 90W
HDD - WD 500GB 3.5
there are 2 basic options
1.a more cubic design - w 185mm * h 85mm * d 185mm


2.a more "box" version - w 180mm * h 70mm * d 300mm

]]> Case Mods - General Discussion iakovl http://www.overclock.net/case-mods-general-discussion/610293-need-help-deciding-itx-case-design.html i7 Rig Revamped *PICS* http://www.overclock.net/case-mods-general-discussion/610171-i7-rig-revamped-pics.html Mon, 16 Nov 2009 04:23:24 GMT Got tired of the blue color sceme, so i decided to change things up a bit! *custom built tech bench, and desktop fan-controller case(stained birch.) *_Before_* Image: http://i126.photobucket.com/albums/p118/edeekeos/IMG_5870.jpg?t=1252905391 *_After_* Image:... Got tired of the blue color sceme, so i decided to change things up a bit!

*custom built tech bench, and desktop fan-controller case(stained birch.)

Before


After







]]> Case Mods - General Discussion l4n b0y http://www.overclock.net/case-mods-general-discussion/610171-i7-rig-revamped-pics.html Toaster Oven for Powder Coating http://www.overclock.net/case-mods-general-discussion/610165-toaster-oven-powder-coating.html Mon, 16 Nov 2009 03:54:56 GMT Weird request but I'm looking for a really large toaster oven that could hold computer parts to bake and cure for the powder coating I will be doing.

My garage doesn't have a 220 volt circuit so I can't use the oven I have laying around :( sad times.

Anyone have any suggestions? ]]> Case Mods - General Discussion stilllogicz http://www.overclock.net/case-mods-general-discussion/610165-toaster-oven-powder-coating.html Antec 300 motherboard tray cutout http://www.overclock.net/case-mods-general-discussion/610054-antec-300-motherboard-tray-cutout.html Mon, 16 Nov 2009 01:14:11 GMT Well I have just about had it with my case and backplate for my noctua nh-u12p. So i was thinking of getting a dremel and cutting a square out right were the back-plate is in the motherboard tray and maybe a few cable management holes. My question is will the case fail on me? like collapse or... Well I have just about had it with my case and backplate for my noctua nh-u12p. So i was thinking of getting a dremel and cutting a square out right were the back-plate is in the motherboard tray and maybe a few cable management holes. My question is will the case fail on me? like collapse or bend? Thanks in advance ]]> Case Mods - General Discussion bk7794 http://www.overclock.net/case-mods-general-discussion/610054-antec-300-motherboard-tray-cutout.html Clear side door....harder than I thought. Pictures. http://www.overclock.net/case-mods-general-discussion/610046-clear-side-door-harder-than-i.html Mon, 16 Nov 2009 00:54:17 GMT Yeah. I bought some clear plexiglass at HD. My dremel is at my gf's house.

It cracks really easy! I tried high & low speeds with a jigsaw, router, bandsaw and hacksaw (electronic, don't ask). All of them sucked.

Here is what I have so far, but I will hopefully finish it tomm night with my dremel.

I plan to cut a square hole in it for my radiator also.











I will have the side completely sealed, other than the hole for where the radiator is mounted currently (the last picture).

See the cracks? This sucks to work with.
]]> Case Mods - General Discussion hondajt http://www.overclock.net/case-mods-general-discussion/610046-clear-side-door-harder-than-i.html Physical mod of HAF 932 question http://www.overclock.net/case-mods-general-discussion/609984-physical-mod-haf-932-question.html Sun, 15 Nov 2009 22:49:58 GMT Hey guys im just getting started on my haf 932 paint/mod job i just painted the mesh grills on the front white. you can see my progress here (http://www.overclock.net/case-mod-work-logs/609367-haf932-beetlejuicer-mod.html#post7656148) Anyways i dont really like how you cant see that much of... Hey guys im just getting started on my haf 932 paint/mod job i just painted the mesh grills on the front white. you can see my progress here


Anyways i dont really like how you cant see that much of the white through the main center grill on the bottom. It seems like the black pieces of plastic going across are too close together. So i had an idea, but im not sure of how to implement it and have it look ok in the end.

I want to cut some of the center area of the black pieces of plastic going across and sharpen the ends to points. The visual effect im wanting is that of spiked teeth. This would let more white show through and give a great looking effect.

Any help on how i should do this?
I was thinking dremmel..but then how could i finish is so it doesn't look cut and sloppy?
Sand paper, and then paint?
Here is a picture so you know what im talking about.


Thanks in advance for any help. ]]> Case Mods - General Discussion Goetic http://www.overclock.net/case-mods-general-discussion/609984-physical-mod-haf-932-question.html <![CDATA[Trap door's for a HAF 922]]> http://www.overclock.net/case-mods-general-discussion/609939-trap-doors-haf-922-a.html Sun, 15 Nov 2009 21:27:37 GMT After reading the ''rate my cbales thread'' over the last few days,I have seen people suggesting for other users to build ''trap doors'' to hide cables behind.I though this was a cool idea so I decided I wanted to make some for my case.

Only made rough templates out of cardboard today but I'll refine these ideas over the week and maybe even get started on building the doors by the weekend.They are being made out of an old case I have lying around.

Heres a pic of what the template looks like :

]]> Case Mods - General Discussion Deano12345 http://www.overclock.net/case-mods-general-discussion/609939-trap-doors-haf-922-a.html nvidia ion cube case mod http://www.overclock.net/case-mods-general-discussion/609878-nvidia-ion-cube-case-mod.html Sun, 15 Nov 2009 19:11:09 GMT http://technabob.com/blog/2009/11/15...be-pc-casemod/

Quote:
Looking like a robotic piece of art, BIll Owens’ award-winning NVIDIA ION Cube PC case mod is based on NVIDIA’s ION ITX motherboard. The aluminum case is decorated with UV green acrylic sheets, lit up with 4 cathode lights, and then placed on pedestal, allowing it to rotate a full 360°.
Quote:
Aside from the ION 330 ITX, the PC is equipped with an x64 SSD by Corsair, 4GB Twin2X4096-6400C5 DDR by Corsair, a 90-Watt Pico power supply unit
by Logic Supply, Windows Vista Premium, and an LG GH22 DVD Writer drive.



:drool:
Bill Owen has some serious mad skill...
video at source ]]> Case Mods - General Discussion Valicious http://www.overclock.net/case-mods-general-discussion/609878-nvidia-ion-cube-case-mod.html