How to: Flash your X850Pro To XT/PE and unlock 16 Pipes! - Page 2 - Overclock.net

Biohazzard · 02-09-06

Hey everyone, I'm having a little problem with flashing my bios to the X850 XT PE and was wondering if I could get some sujestions. I picked up my card from Future Shop and it has the little yellow VIVO thingy and the Samsung 1.6ns memory. I have read many posts on how to do this and still nothing happens. Well I get the speed changes but the pipes stay at 12. I used ATIFLASH and FLASHMOD to do this with FLASHMOD at the end my PC Speaker makes a noise and then goes back to the CMD Promt.I got this cad a few days ago so I don't know if that makes a difference.

Here are the posts I have read and followed.

http://forums.guru3d.com/showthread.php?t=149491

http://www.techpowerup.com/articles/...ing/vidcard/34

I am hopeing that someone will be able to help me out on this one. Thanks in Advance.

Biohazzard

Iron Beaver · 02-10-06

OK this is not a brag I am only trying to impart my knowledge level to save some time as I have found it is easier for me to support someone when I have a clear understanding of there knowledgebase. I have been using computers since the days when the Z80 processor was king and have been working in IT since the mid 90's including my last postion as an independent contractor for Lockheed Martin Information Technologies on the ODIN contract at the NASA Glenn Research Center. I know enough to know how much I really don't know and to know what I really do know. That being said here is the problem I am having with this.

On Jan 13, 2006 I purchased an ATI x850 Pro 256MB AGP w/VIVO 4 days ago I decided to flash using the instruction and resources provided by this post.

I have used the modified flashrom with the files in both the ATI X850XTPE AGP.zip and the x850 xtpe 1.6 fan control agp.zip files using the following commands:

Code:

flashrom.exe -f -p 0 renamed.bin

The windows API now recognizes the device as an ATI x80 XT PE and the clock speeds (which the ATItool confirms my chip will handle without artifacts) defaults to 540/590. However both the ATItool and EVEREST Ultimate Edition 2006 only report 12 pixel pipelines.

Upon fruther research I discovered this article;
http://www.techpowerup.com/articles/...ng/vidcard/100

So I then used the modified flashrom from both here and then from there and flashed with the empty.bin file provided there and immediately re-flashed with one then the other bin files proved here (on separate attempts). I could still only confirm 12 pixel pipelines. I then used Atiflash.exe v3.09 with this command:

Code:

Atiflash.exe –newbios –f –p 0 renamed.bin

With both bin files provided here (on separate attempts) and still find only 12 pixel pipelines.

I have googled until my eyes have turned to puss filled, scab covered orbs and find myself at a complete loss to explain why this is so. If anyone here can shed any light on the difficulties I am experiencing I would be most grateful.

update

here is the sys info from the ATI Tray Tolos utility

General

Code:

______________________________
General                       
Display adapter               Radeon X850XT PE (4B4C)
Core Name                     R481
SubVendor                     ATI (1002)
SubDevice                     0312
BUS                           1
Device                        0
Function                      0
Base Address 0                E0000008
Base Address 1                00008001
Base Address 2                FD000000
Base Address 3                00000000
Catalyst Registry Path         
System\CurrentControlSet\Control\Video\{D268EEF4-FDFD-40FE-ABCA-726CB5BCB8E0}\0000 
                              
______________________________
Clock Information             
BIOS VPU                      540.00
Current VPU                   499.50
BIOS MEM                      590.00
Current MEM                   499.50
                              
______________________________
Radeon PCI configuration space
    00 01 02 03 04 05 06 07 08 09 0A 0B 0C 0D 0E 0F  
00  02 10 4C 4B 07 01 B0 02 00 00 00 03 10 40 80 00 
10  08 00 00 E0 01 80 00 00 00 00 00 FD 00 00 00 00 
20  00 00 00 00 00 00 00 00 00 00 00 00 02 10 12 03 
30  00 00 F0 FC 58 00 00 00 00 00 00 00 10 01 08 00 
40  00 00 00 00 00 00 00 00 00 00 00 00 02 10 12 03 
50  01 00 02 06 00 00 00 00 02 50 30 00 1B 02 00 FF 
60  12 03 00 1F 00 00 00 00 00 00 00 00 00 00 00 00 
70  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
80  05 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
90  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
A0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
B0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
C0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
D0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
E0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
F0  00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 
                              
______________________________
Hardware Information          
Installed memory              256 Mb
Memory Type                   GDDR3
Memory Width                  256 bit
Active Rendering Pipelines    12
                              
______________________________
ASIC details                  
Family                        56
Emulated Revision             31
Gfx Engine ID                 3
                              
______________________________
Radeon Registers              
RADEON_BIOS_0_SCRATCH         00000802
RADEON_BIOS_1_SCRATCH         0100C000
RADEON_X_MPLL_REF_FB_DIV      00252502
RADEON_XCLK_CNTL              00007FFA
RADEON_MCLK_CNTL              00031212
GB_TILE_CONFIG                0001001D
MC_TIMING_CNTL                69668234
MC_SDRAM_MODE_REG             10430000
                              
______________________________
Video BIOS Information        
Version                       009.008.001.004
Part Number                   113-A47501-101
Date                          2005/01/18 23:54
                              
______________________________
Controller Configurations     
Controller 0                   
Active Connections:            
   -Monitor (CRT1) (0) 1280x1024x90 
Controller 1                   
Active Connections:            
   No Active Connections       
                              
______________________________
Displays supported by adapter 
0                             (1) Monitor (CRT1)
1                             (2) Second Monitor (CRT2)
2                             (4) Component Video Output
3                             (8) TV
4                             (16) Digital Flat Panel

12C Scan

Code:

I2C ($90)
I2C Bus (DDC$10)
I2C Bus (DDC$8)
Reply on address 37 - 110
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E 6E
Reply on address 50 - 255
 00 FF FF FF FF FF FF 00 24 4D 98 19 01 01 01 01
 28 09 01 01 6E 28 1E 96 E8 0C C9 A0 57 47 9B 27
 12 48 4C EF CF 00 31 59 45 59 61 59 71 59 81 99
 A9 4F A9 59 01 01 90 14 C0 2C 31 11 1C 20 0C 6C
 1A 00 84 23 11 00 00 1A 00 00 00 FC 00 49 42 4D
 20 50 32 36 30 20 20 20 20 20 00 00 00 FD 00 32
 A0 1E 79 1E 00 0A 20 20 20 20 20 20 00 00 00 FF
 00 35 35 2D 31 37 30 30 37 0A 20 20 20 20 00 25
 00 FF FF FF FF FF FF 00 24 4D 98 19 01 01 01 01
 28 09 01 01 6E 28 1E 96 E8 0C C9 A0 57 47 9B 27
 12 48 4C EF CF 00 31 59 45 59 61 59 71 59 81 99
 A9 4F A9 59 01 01 90 14 C0 2C 31 11 1C 20 0C 6C
 1A 00 84 23 11 00 00 1A 00 00 00 FC 00 49 42 4D
 20 50 32 36 30 20 20 20 20 20 00 00 00 FD 00 32
 A0 1E 79 1E 00 0A 20 20 20 20 20 20 00 00 00 FF
 00 35 35 2D 31 37 30 30 37 0A 20 20 20 20 00 25
I2C Bus (DDC$0)
Reply on address 4C - 46
 29 2E 80 83 08 46 00 6E 00 83 08 46 00 6E 00 00
 00 00 00 00 00 00 E7 00 00 64 00 00 00 00 00 00
 00 05 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 FF FF 30 16 3E 1F 00 04
 00 03 56 04 5B 07 60 16 60 16 60 16 60 16 60 16
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 26 20 23 D5 8C 00 05 00 00 00 00 00 00 00 00 01
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 41
Done

Ste · 02-10-06

If you can post your ATiTool Fuse config, details here: http://www.overclock.net/ati-drivers...light=mod+x850 then I can let you know if this is likely to unlock. Unfortunately, not all X850pro vivos unlock anymore.

Biohazzard · 02-10-06

Ok I have used ATi Tool to get my FUSE numbers and here they are.

CONFIG_DIE_FUSES = 0xFFFFDFFF
CONFIG_SUBSTRATE_FUSES = 0xFFFFF9E
CONFIG_ROM_FUSES = 0x861

I have included 2 screenshots of my ATI Tool

Ste · 02-10-06

Quote:

Originally Posted by Biohazzard

Ok I have used ATi Tool to get my FUSE numbers and here they are.

CONFIG_DIE_FUSES = 0xFFFFDFFF
CONFIG_SUBSTRATE_FUSES = 0xFFFFF9E
CONFIG_ROM_FUSES = 0x861

I have included 2 screenshots of my ATI Tool

Sorry, this won't unlock to 16p

Spare-Flair · 02-13-06

Guys, I need to return my built by ATI X850 Pro AGP back down to it's regular clockspeeds and back to the original 12 pipelines and the original bios.

How do I do this?
I swore I saved my old bios but I can't tell if it's correct for my model as ATI Tool is telling me there is still 16 pipelines.

Can somebody provide me with their original saved bios for the X850 Pro AGP?
This page has two bioses of the X850 Pro AGP but they have different clock speeds and I don't know which is which: http://www.techpowerup.com/bios/

OR - please do me a kind favor and check the file that I've attached. :) This is the bios that I believe is the one I backed up from my card before I flashed it for the first time. Can you check if it's the proper bios for 12 pipelines and the default clocks for ATI's card? I don't know how to read it's contents, I tried a hex dump but most of it was gibberish.

Thanks.

Ste · 02-13-06

Try the following command through Atiflash: atiflash -newbios -f -p 0 filename.bin (replacing filename with the name of your bios.) This won't preserve any rom settings from the last bios and should bios lock the 4 pipelines. If this doesn't work, let me know and I'll check it through a Hex Editor.

Also, probably a good idea to setup a new thread if you need further help with this as it's not really related to Mikey's FAQ. :)

purehaTe · 04-15-06

Hello Guys,

i would be very grateful if someone of you is able to create
a X850XT BIOS with Fan Control for me. I flashed my Powercolor Radeon X850 Pro
two days ago but it doesn´t work stable with PE Clocks, only with XT.

purehaTe

Osirls · 04-15-06

Hi i've managed to unlock the extra 4 pipelines using an XT BIOS from my old PRO BIOS, but whenever i flash back with my old PRO BIOS it says i only have 12 pipes open.

How can i get the 4 extra pipes to stay open?

I wouldn't mind just using an XT or PE bios but i cannot get the fan control to work, even with BIOS that are being said allow fan control.

Any ideas?

Thanks

purehaTe · 04-16-06

Have you installed the Catalyst again?

02-10-06	#14 (permalink)
Biohazzard New to Overclock.net Join Date: Feb 2006 Posts: 2 Rep: 0 Unique Rep: 0 Trader Rating: 0	Ok I have used ATi Tool to get my FUSE numbers and here they are. CONFIG_DIE_FUSES = 0xFFFFDFFF CONFIG_SUBSTRATE_FUSES = 0xFFFFF9E CONFIG_ROM_FUSES = 0x861 I have included 2 screenshots of my ATI Tool Attached Thumbnails

04-15-06	#18 (permalink)
purehaTe New to Overclock.net Join Date: Apr 2006 Posts: 2 Rep: 0 Unique Rep: 0 Trader Rating: 0	Hello Guys, i would be very grateful if someone of you is able to create a X850XT BIOS with Fan Control for me. I flashed my Powercolor Radeon X850 Pro two days ago but it doesn´t work stable with PE Clocks, only with XT. purehaTe Last edited by purehaTe : 04-15-06 at 05:44 AM.

		Overclock.net - Overclocking.net > Overclock.net Forum > FAQs
How to: Flash your X850Pro To XT/PE and unlock 16 Pipes!

02-09-06	#11 (permalink)
Biohazzard New to Overclock.net Join Date: Feb 2006 Posts: 2 Rep: 0 Unique Rep: 0 Trader Rating: 0	Hey everyone, I'm having a little problem with flashing my bios to the X850 XT PE and was wondering if I could get some sujestions. I picked up my card from Future Shop and it has the little yellow VIVO thingy and the Samsung 1.6ns memory. I have read many posts on how to do this and still nothing happens. Well I get the speed changes but the pipes stay at 12. I used ATIFLASH and FLASHMOD to do this with FLASHMOD at the end my PC Speaker makes a noise and then goes back to the CMD Promt.I got this cad a few days ago so I don't know if that makes a difference. Here are the posts I have read and followed. http://forums.guru3d.com/showthread.php?t=149491 http://www.techpowerup.com/articles/...ing/vidcard/34 I am hopeing that someone will be able to help me out on this one. Thanks in Advance. Biohazzard

04-16-06	#20 (permalink)
purehaTe New to Overclock.net Join Date: Apr 2006 Posts: 2 Rep: 0 Unique Rep: 0 Trader Rating: 0	Have you installed the Catalyst again?

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)