So guys, it looks like im going to be extending the case by a half inch on each side. Making it wider, that is, for the radiator I want to use. I worked it out in Sketchup today, and I would only have 9/64" of space between the rad and the edge of the case :/ I wish I would have known about this radiator from the start of the build. Oh well, I just hope I don't mess this up I'm going to see what scraps of oak I can scrounge, and possibly use some of my wood I bought. I hope everything goes well
So originally I was thinking of adding pieces to the sides, but I realized I can add a piece in the middle, if I just cut the pieces right in the center. The cool thing about this is I will be able to put an "accent" stripe down the center of the case. I also may be able to do some laser engraving as well. I will load up some Sketchup pictures tomorrow.