Other Builds (Click to show)
Depending on the rad you get (thickness of the rad will be a factor) you will be able to put three at the top to pull air out however in a push configuration you may be able to put 1 possible 2 fans on the bottom of the rad. The problem is the thickness of the rad and the MB thermal cooling which does not allow for a fan to fit between them.
I always found it funny for a case like the Cosmos 2 does not have a lot of clearance from the edge of the Mobo to the top of the case. They should have moved the motherboard holes and faceplate down about half to an Inch and you would never have any issues. There is enough room in the case to do this.
History is written by the Victors to justify there Means.
Will have pics when they start working again..
Still testing my Overclocks etc..
What material is that, just white died acrylic?
Well My Project has begun.
Ohh need to add the fans to my build manager so everyone knows which I use
Look down at my cosmos II build for info.